Olly350z Posted January 25, 2017 Share Posted January 25, 2017 Hey Everyone, Please have a look below to find all details ITEM : Here we have a Nismo V2 replica front bumper with canards painted in WV2 paintcode. CONDITION : 7.5 out of 10. Overall as the pictures will show its in good condition as far as FPR products can be. It does have scrape marks under the lip but they arnt deep. It does have stone chips on the front grill area and two spider web cracks either side which pictures show. I'm being completely honest here it would benefit from a blow over to restore it to a 10/10 condition again. You can see from the pictures its an excellent fit being very tight on all hangers. LOCATION : West Sussex POSTAGE / COLLECTION : This is collection only guys, sorry but I'm not prepared to trust it to any postal or courier service! I am willing to travel within certain distances if needs be PRICE : There are a couple options here. If you have a replica Nismo N1 bumper then i'll happily straight swap / looking for £150 please, this is a near £300 pound bumper when new / OR if you have a standard WV2 bumper and lip then I'll happily straight swap for that too! My reason for sale is I'd like to go down a different direction styling wise PICTURES : Please look through my build thread or if you'd like PM me and I can literally send you hundreds of pictures from multiple angles Link to comment Share on other sites More sharing options...
Apoc124 Posted January 25, 2017 Share Posted January 25, 2017 PM'd 1 Link to comment Share on other sites More sharing options...
Rob350 Posted January 25, 2017 Share Posted January 25, 2017 (edited) You must be extreamly slim to get in and out of that car mate lol but nice bumper though Edited January 25, 2017 by Rob350 1 Link to comment Share on other sites More sharing options...
Swiftyy Posted January 26, 2017 Share Posted January 26, 2017 I'll take it from you. When's best for collection? Link to comment Share on other sites More sharing options...
Saif7799 Posted January 26, 2017 Share Posted January 26, 2017 Hi mate I have a nismo v1 currently fitted to my car but need some work done to it there is no cracks but need filling and repaint here is some photos Sent from my SM-G920F using Tapatalk Link to comment Share on other sites More sharing options...
Olly350z Posted January 26, 2017 Author Share Posted January 26, 2017 All PMs received and read. Saif7799 ill take yours into consideration but ideally need the N1 that has the headlight washers, as you can see mine are leaking! Apoc same situation as above, but its looking like swiftyy will be collecting at the weekend. Will keep you updated Link to comment Share on other sites More sharing options...
Apoc124 Posted January 26, 2017 Share Posted January 26, 2017 happy to chuck in washers aswell if its easy enough to bung them up after taking them off! Link to comment Share on other sites More sharing options...
Swiftyy Posted January 26, 2017 Share Posted January 26, 2017 Pm replied to Link to comment Share on other sites More sharing options...
Olly350z Posted January 26, 2017 Author Share Posted January 26, 2017 I have washers APOC124 but unfortunately my make shift bung leaks loool. Just want to go back to a more OEM setup Link to comment Share on other sites More sharing options...
Olly350z Posted January 29, 2017 Author Share Posted January 29, 2017 Not sure what happened to Swiftyy but bumper is still for sale guys. Link to comment Share on other sites More sharing options...
Jimnirvana Posted January 29, 2017 Share Posted January 29, 2017 Definitely no chance of postage? I'm in Derbyshire and I'd snap this up if I could get it delivered! Link to comment Share on other sites More sharing options...
Olly350z Posted January 30, 2017 Author Share Posted January 30, 2017 As an absolute last ditch effort then maybe, but I cant stress how much Im against it. I travelled to Bristol for it, around 3 and a half hours each way. Id rather that then trusting into to get damaged and go through the hassle of claiming etc Link to comment Share on other sites More sharing options...
Jimnirvana Posted January 30, 2017 Share Posted January 30, 2017 Yeah I totally understand, I've bought a few guitars/amps of ebay to find them in bits after the posty had his way with them. If you'd be willing to package it up well enough etc and arrange a courier I'd be happy to take the risk? If it ends up damaged I'll take it on the chin and say you told me so haha! If you were closer I'd drive down there but time's a hard thing to come by at the minute! Link to comment Share on other sites More sharing options...
KyleR Posted January 30, 2017 Share Posted January 30, 2017 Bubble wrap the life out of it and wrap it in cardboard, print out a few "fragile" signs and stick one on each sign and it'll be fine. I sent a carbon lipped V2 from NI to the mainland with zero issues, but I did pay for Parcelforce rather than trusting it to the likes of Paisley Freight or any budget carrier. Link to comment Share on other sites More sharing options...
Jimnirvana Posted January 30, 2017 Share Posted January 30, 2017 That'd be grand if you could Olly? Dibs if so! Obviously I'll happily cover packing materials etc too Link to comment Share on other sites More sharing options...
Apoc124 Posted January 31, 2017 Share Posted January 31, 2017 is this still ongoing? sent Pms sunday and yesterday and read but no reply.. if not interested a courtesy no thanks would be sufficient Link to comment Share on other sites More sharing options...
Olly350z Posted January 31, 2017 Author Share Posted January 31, 2017 That'd be grand if you could Olly? Dibs if so! Obviously I'll happily cover packing materials etc too Bubble wrap the life out of it and wrap it in cardboard, print out a few "fragile" signs and stick one on each sign and it'll be fine. I sent a carbon lipped V2 from NI to the mainland with zero issues, but I did pay for Parcelforce rather than trusting it to the likes of Paisley Freight or any budget carrier. I was under the impression that parcel Force and the like really didn't like taking bumpers due to the size and awkwardness of them? Maybe times have changed from when I worked with them! As I said Chap its very much last resort Im afraid, there are a few members closer who are interested in collection which is better for everyone. See how things go Link to comment Share on other sites More sharing options...
KyleR Posted January 31, 2017 Share Posted January 31, 2017 They don't care, but it isn't covered for a insurance purposes, but it's a fibreglass bumper that's gonna be prepped and painted anyway, so anything short of being snapped in 2 won't matter. There are thousands of bumpers shipped every month, if not every week, carriers are well used to them. Link to comment Share on other sites More sharing options...
Olly350z Posted January 31, 2017 Author Share Posted January 31, 2017 Thanks. Link to comment Share on other sites More sharing options...
Olly350z Posted February 6, 2017 Author Share Posted February 6, 2017 UP. Still looking for a WV2 bumper and lip combination etc. If not it'll just be refitted Link to comment Share on other sites More sharing options...
Apoc124 Posted February 6, 2017 Share Posted February 6, 2017 happy to do my bumper + some cash towards a lip of your choosing as there is so many different styles out there, as previously mentioned mine doesn't have a lip. Im still interested in this and would be happy to collect but upto you. Link to comment Share on other sites More sharing options...
Saif7799 Posted February 21, 2017 Share Posted February 21, 2017 UP. Still looking for a WV2 bumper and lip combination etc. If not it'll just be refitted Hi there is your bumper still available for sale? I need to collect as soon as Thanks Sent from my SM-G920F using Tapatalk Link to comment Share on other sites More sharing options...
Olly350z Posted February 24, 2017 Author Share Posted February 24, 2017 Sold, thank you admin Link to comment Share on other sites More sharing options...
GMballistic Posted February 24, 2017 Share Posted February 24, 2017 Sold - thread locked Link to comment Share on other sites More sharing options...
Recommended Posts