martybhoy Posted January 8, 2017 Share Posted January 8, 2017 Hey guys, Thought I'd share my test of the auto finesse iron out product in the off chance you were considering it. Sadly it's on the 350z replacement. Still gutted I'm no longer a Z owner. Quote Link to comment Share on other sites More sharing options...
davey_83 Posted January 8, 2017 Share Posted January 8, 2017 Looks fab, tested on right mucky wheels would be more impressive though. 1 Quote Link to comment Share on other sites More sharing options...
Andy_Muxlow Posted January 8, 2017 Share Posted January 8, 2017 Looks great buddy. I have been thinking about getting some. Were you happy with the results? Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
martybhoy Posted January 8, 2017 Author Share Posted January 8, 2017 On 08/01/2017 at 15:40, davey_83 said: Looks fab, tested on right mucky wheels would be more impressive though. I think the sharpness of the camera maybe didn't show the dirt and grime up as much. The wheel was moderately dirty with a lot of roadworks in my local area and around 250 miles use since the last wash. On 08/01/2017 at 15:40, Andy_Muxlow said: Looks great buddy. I have been thinking about getting some. Were you happy with the results? Sent from my iPhone using Tapatalk I was particularly impressed. Without the use of a wheel cleaner product or any agitation with a brush or soap to be rinsed off and leave the wheel in the condition it was, I thought was very good. I have content for another video with purely the wheel cleaner which I'll upload when I get a chance, I found using iron out, rinse and then wheel cleaner left the wheels extremely bright, clean and smooth to the touch. I'll post try and make time if people respond well to the videos. Cheers for the first feedback. 1 Quote Link to comment Share on other sites More sharing options...
Stutopia Posted January 8, 2017 Share Posted January 8, 2017 Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? 1 Quote Link to comment Share on other sites More sharing options...
martybhoy Posted January 8, 2017 Author Share Posted January 8, 2017 On 08/01/2017 at 16:03, SuperStu said: Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? Haha in all fairness this does smell pretty bad! Not used Revolt though so can't say which is better/worse. 1 Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted January 8, 2017 Share Posted January 8, 2017 On 08/01/2017 at 16:03, SuperStu said: Nice for a touchless wash. I was just using REVOLT on my wheels this morning. Smells like the end of the world. Is this any better? Not according to the tests in my thread, no. Revolt is currently my go to and I'd be surprised if anything that's not Bilt Hamber beats it... should I ever get round to finishing that test 1 Quote Link to comment Share on other sites More sharing options...
coldel Posted January 9, 2017 Share Posted January 9, 2017 I use BH Auto Wheel great stuff. Also smells. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted January 9, 2017 Share Posted January 9, 2017 Auto Wheels isn't exactly a pleasant scent, that's true - you certainly wouldn't want to use it as an air freshener! But it's still a lot better than some. Quote Link to comment Share on other sites More sharing options...
Stutopia Posted January 9, 2017 Share Posted January 9, 2017 Larry makes a wheel one which smells delicious - plum scented. It's also one of the more competitively priced in the range (ignoring international shipping and import duty and the collapse of sterling ) Quote Link to comment Share on other sites More sharing options...
Olly350z Posted January 9, 2017 Share Posted January 9, 2017 Used one of the juicy range fallout removers from Steveo and was very impressed. But my god, why do these all smell like hells arsehole!? Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted January 9, 2017 Share Posted January 9, 2017 On 09/01/2017 at 10:54, Olly350z said: But my god, why do these all smell like hells arsehole!? They're typically Oxalic/Thioglycolic acid based and utilises ammonia. 1 Quote Link to comment Share on other sites More sharing options...
coldel Posted January 9, 2017 Share Posted January 9, 2017 And the guttering of the road outside the house looks like some sort of ritual sacrifice has just occured..! 2 Quote Link to comment Share on other sites More sharing options...
Paul K Posted January 9, 2017 Share Posted January 9, 2017 I've been using Iron X, and much the same story....it stinks, and looks like I've opened an artery when washed off Quote Link to comment Share on other sites More sharing options...
Ridz Posted January 9, 2017 Share Posted January 9, 2017 On 09/01/2017 at 07:36, coldel said: I use BH Auto Wheel great stuff. Also smells. Sent from my iPhone using Tapatalk +1 for Bilt Hamber Auto Wheel Quote Link to comment Share on other sites More sharing options...
coldel Posted January 9, 2017 Share Posted January 9, 2017 If you order it on some ebay traders you get a cute little agitation brush and microfibre towel chucked in with it too. Quote Link to comment Share on other sites More sharing options...
Paul_B Posted February 4, 2017 Share Posted February 4, 2017 I used Autosmart's Red7 it half the price of iron X plus doesn't smell as bad and I think it does a much better job. Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted February 4, 2017 Share Posted February 4, 2017 On 04/02/2017 at 21:24, Paul_B said: iron X... and I think it does a much better job. That's not difficult, Iron X is c**p!! See. And see. Quote Link to comment Share on other sites More sharing options...
Ricey Posted February 5, 2017 Share Posted February 5, 2017 Envys Iron Awe smells a bit better. Tims put some sort of fragrance in it to cover the ammonia smell Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
martybhoy Posted February 9, 2017 Author Share Posted February 9, 2017 I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted February 9, 2017 Share Posted February 9, 2017 There aren't any official resellers, UK or Stateside. Larry is the only official seller of his products and shipping is a set price. 1 Quote Link to comment Share on other sites More sharing options...
Stutopia Posted February 9, 2017 Share Posted February 9, 2017 On 09/02/2017 at 12:40, martybhoy said: I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. I occasionally order some from the US if you fancy going halves on shipping some time. Quote Link to comment Share on other sites More sharing options...
martybhoy Posted February 9, 2017 Author Share Posted February 9, 2017 On 09/02/2017 at 13:08, ilogikal1 said: There aren't any official resellers, UK or Stateside. Larry is the only official seller of his products and shipping is a set price. Yeah I had wondered whether these companies were just importing and putting on a markup. On 09/02/2017 at 13:40, SuperStu said: On 09/02/2017 at 12:40, martybhoy said: I didn't realise how popular the Iron remover products were. I would really like to try some of Larrys stuff but I dont seem to find a UK supplier at a reasonable price. I occasionally order some from the US if you fancy going halves on shipping some time. Let me know next time you are ordering and I'll certainly check out my supplies haha Quote Link to comment Share on other sites More sharing options...
teejay Posted March 8, 2017 Share Posted March 8, 2017 can anyone tell me if this iron out removes c5 in the cleaning process Quote Link to comment Share on other sites More sharing options...
ilogikal1 Posted March 8, 2017 Share Posted March 8, 2017 On 08/03/2017 at 19:22, teejay said: can anyone tell me if this iron out removes c5 in the cleaning process I can. It does not. C5 can withstand acids like fallout removers but will be weakened by strong alkalis (such as "non-acidic" wheel cleaners). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.