Jump to content

FS: Pro level RC gear, Xray T4 touring car and pro pit tools, brand new


Aashenfox

Recommended Posts

Hey hey!

 

As I've mentioned a couple of times, I review RC gear professionally and I've been in the hobby for 30 years. It;s time to sell some stuff off to fund further projects on the Zed. This is pretty specialised stuff, I'd be surprised if there's much interest, but I figured I'd post here before I put them up on ebay, you never know. Particularly the tools are a bargain. With this stuff and equivalent ancillaries, you are ready to go to the World Championships. Some would argue (I would) that this is some of the finest RC gear available.

 

So here's a group shot, in the pic you can see a brand new Xray T4 2015 specs pro touring car, and a set of Hudy Setup Tools for adjusting the chassis, including the flat board with measurements.

 

both1_zpsmg6ydxoa.jpg

 

Here's a shot of the car box open, showing everything brand new, and a few extras. This kit is not supplied with wheels and tyres, but I'm supplying it with some. Likewise there is a pinion gear included which normally there wouldn't be, and also a 64 pitch (fine gear pitch) spur gear, which is a very small one for stock racing with very large pinion gears. The pinion and spur gears pictured are not compatible, but the car can be built running with the kit supplied spur and supplied pinion gear, or with the separate purchase of a 64pitch pinion gear (ideally around 35 tooth) and use of the aftermarket spur gear supplied.

 

t4_1_zpsvq6nb8bt.jpg

t4_2_zpsku9bebod.jpg

 

And lastly a shot of the tools, however, rather than explaining what these do and including a load of pictures, please see the review of these that I wrote earlier in the year for RC Tech. - http://www.rctech.ne...-in-refinement/

 

setuptools1_zpsgisypjpc.jpg

 

I'm asking 320GBP for the car kit and extras, and another 320GBP for the tools and setup board (quite the bargain). If anyone takes the lot, 600GBP is fine. Near offers will be entertained as will exchanges for 350z items. I will probably take on shipping cost to the uk, depending, we'll see, in any case, if I need a contribution, it won't be outrageous. :)

Edited by Aashenfox
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...