cov350z Posted July 4, 2016 Share Posted July 4, 2016 Right guys any one got access to a Nissan consult 2 device. I've had a bit of a nightmare when relocating my cruise control and spliced a wrong wire and caused and electric fault to be present and now I've got no speedo. abs brake TCS and slip lights on dash other than that all works fine put back wire and tried an ecu reset but no joy and don't fancy the 70 quid Nissan gonna charge me. Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted July 4, 2016 Share Posted July 4, 2016 Find an independent garage that uses the diagnostic tool from Snap-On, that should have Consult 2 on it. Went to local-ish garage to me (Colcester,Essex), and they used that to read and clear a code that the regular code readers cant read. Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted July 4, 2016 Share Posted July 4, 2016 I think that it may cost more than £70,00 for an informed diagnoses for your issue. My first port of call would be to methodically check all fuses and fuse links. Also, did you check for DTCs ? Good luck. Quote Link to comment Share on other sites More sharing options...
cov350z Posted July 4, 2016 Author Share Posted July 4, 2016 have run through a full works all fuses are good and everything working as should engine runs fine just no speedo lol but revs to top and idles fine. even the retrofitted cruise control buttons work . well just the activation light comes one (cruise green light) as i ant set a speed as no speedo and dash lights deactivate the cruise by default. codes i get match up with a cut wire aswel p1001 and p1212 Quote Link to comment Share on other sites More sharing options...
Adam B Posted July 21, 2016 Share Posted July 21, 2016 Assuming you have a tablet or smart phone with bluetooth: Torque Pro app [in all stores] and: http://www.plxdevices.com/category-s/195.htm connected to both my Z`s, vokswagens etc without issue. Costs a lot more than cheap Chinese ebay S*@t but actually works. Up to you if its worth it Quote Link to comment Share on other sites More sharing options...
johnnyboy Posted September 21, 2016 Share Posted September 21, 2016 Right guys any one got access to a Nissan consult 2 device. I've had a bit of a nightmare when relocating my cruise control and spliced a wrong wire and caused and electric fault to be present and now I've got no speedo. abs brake TCS and slip lights on dash other than that all works fine put back wire and tried an ecu reset but no joy and don't fancy the 70 quid Nissan gonna charge me. How did you get on with this? Quote Link to comment Share on other sites More sharing options...
cov350z Posted September 21, 2016 Author Share Posted September 21, 2016 An old friend of mine happened to have a garage now and messaged me saying he had a snap on diog tool so went down and sorted it had a blown fuse and then needed a reset. All working now and did a 2000 mile trip to France worked like a dream on the French motorways 😉 Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted September 21, 2016 Share Posted September 21, 2016 So it was a fuse as per my post #3. I can never get why peeps who post up gleaning for information with a technical issue very rarely come back with what the fault actually was. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.