Spatt Posted June 22, 2016 Share Posted June 22, 2016 I'm going to try and order a new Exedy clutch kit from ebay soon as they're only 250 notes and money is tight right now... I already have a lightweight fly and hopefully this shouldn't need to be replaced. So the clutch is slipping like mad now when cold (Works fine when hot) If i floor it in the any gear i get revs and not much else. I have looked at the adjustment thread for the pedal but i don't think this will work. I'm going to try and attempt this myself with some friends who have done this kind of thing before but never on a 350z. I notice a squeaking from the pedal when on the bite point should i be worried about this / check anything / replace anything while i'm at the job?? Anything i should know about before undertaking the challenge? ta in advance Matt Quote Link to comment Share on other sites More sharing options...
FiddyZed Posted June 22, 2016 Share Posted June 22, 2016 Good luck, I'd love to attempt something like that myself! I do remember reading a thread not too long ago of someone changing the clutch themselves on here... Cant remember who though. Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 22, 2016 Share Posted June 22, 2016 If your Ebay purchase is from Techniclutch or NCD then best to avoid at all costs. Quote Link to comment Share on other sites More sharing options...
AliveBoy Posted June 22, 2016 Share Posted June 22, 2016 And at a minimum, you should get the flywheel skimmed, so that there's a lovely new surface for the clutch to bed in to. It's around the £50 mark normally. Quote Link to comment Share on other sites More sharing options...
Spatt Posted June 22, 2016 Author Share Posted June 22, 2016 Cheers for the heads up on that, i could probably do that myself but i'll have a look when we take the clutch out. Quote Link to comment Share on other sites More sharing options...
Spatt Posted June 22, 2016 Author Share Posted June 22, 2016 If your Ebay purchase is from Techniclutch or NCD then best to avoid at all costs. Why is that? Bad service, faulty parts? Just got off the phone with a company in London will ship to my local Argos for free within a few days sounds ideal Quote Link to comment Share on other sites More sharing options...
JohnM Posted June 22, 2016 Share Posted June 22, 2016 You've probably seen this video...all useful info. Quote Link to comment Share on other sites More sharing options...
gareth29 Posted June 22, 2016 Share Posted June 22, 2016 Nice vid - he likes his Zeds! I thought that with a DMF that the friction disc was not sprung!? All those springs must create a lot of sloppiness Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.