zebedee! Posted January 8, 2008 Share Posted January 8, 2008 Is it just the tyre sizes thats making these look wrong? Currently the rears are 275/30/19 i will change them to 285/35/19 should that even it up because to me at the minute the rears seem to look to small The jack had no weight on it btw Also please help me decide on colour choice for them To give an idea of the red: Quote Link to comment Share on other sites More sharing options...
Lexx Posted January 8, 2008 Share Posted January 8, 2008 Yeah, the rears look lost in the arches! Increasing the sidewall should work Quote Link to comment Share on other sites More sharing options...
rmmackfc Posted January 8, 2008 Share Posted January 8, 2008 Is it still on the jack? The camber of the drive might not help either Offset and width? Quote Link to comment Share on other sites More sharing options...
zebedee! Posted January 8, 2008 Author Share Posted January 8, 2008 Is it still on the jack? The camber of the drive might not help either Offset and width? 10.5J wide so they have got some stretch on atm Offset has been sorted with a spacer it's +22 now: Going to have to bolt the rears on again and check it want on the jack though im sure it's not Quote Link to comment Share on other sites More sharing options...
rmmackfc Posted January 8, 2008 Share Posted January 8, 2008 check it want on the jack though im sure it's not Offsets look good, cambers can play mind tricks right enough. Get it on a flat road and check again. Still looks though Quote Link to comment Share on other sites More sharing options...
Ian Posted January 8, 2008 Share Posted January 8, 2008 What wheels are they? They look great I would leave them that colour Quote Link to comment Share on other sites More sharing options...
GIXXERUK Posted January 8, 2008 Share Posted January 8, 2008 looks need a pic on the flat, going off those pics it looks as though it wants lowering a tad plus you have just jacked it up so the suspension wont have settled back Quote Link to comment Share on other sites More sharing options...
GIXXERUK Posted January 8, 2008 Share Posted January 8, 2008 What wheels are they? They look great I would leave them that colour +1 Quote Link to comment Share on other sites More sharing options...
Zedrush Posted January 8, 2008 Share Posted January 8, 2008 the more I see red ones the more I contemplate getting mine sprayed red Quote Link to comment Share on other sites More sharing options...
djtimo Posted January 8, 2008 Share Posted January 8, 2008 please dont paint them red!!!!!!!!!!! Back or gunmetal! Just go for a 295?35?19 !! will look beefy! Quote Link to comment Share on other sites More sharing options...
sinbad Posted January 8, 2008 Share Posted January 8, 2008 That looks stunning as does the wheels. Maybe lowering it and getting taller sidewalls will do the trick. Still even in its current guise Quote Link to comment Share on other sites More sharing options...
GIXXERUK Posted January 8, 2008 Share Posted January 8, 2008 the more I see red ones the more I contemplate getting mine sprayed red +1 mate, reds are reallying looking lately Quote Link to comment Share on other sites More sharing options...
H5 Posted January 9, 2008 Share Posted January 9, 2008 One the car has moved and the suspension has settled it should look better. Quote Link to comment Share on other sites More sharing options...
Digsy Posted January 9, 2008 Share Posted January 9, 2008 I think you'd be better with a 35 profile on the rear and if you're still not happy you should look into a small drop. Wheels are looking good though and I wouldn't change the colour. Red wheels are cack BTW... Quote Link to comment Share on other sites More sharing options...
jonathan73 Posted January 9, 2008 Share Posted January 9, 2008 Like H5 mentioned - it should settle a little lower once moved. If not, I'd go for higher sidewalls (may be 35 would be OK but 40s certainly would) and perhaps invest in lowering it a touch if necessary. Quote Link to comment Share on other sites More sharing options...
ir_fuel Posted January 9, 2008 Share Posted January 9, 2008 I think you'd be better with a 35 profile on the rear and if you're still not happy you should look into a small drop. Wheels are looking good though and I wouldn't change the colour. Red wheels are cack BTW... I agree Quote Link to comment Share on other sites More sharing options...
M13KYF Posted January 9, 2008 Share Posted January 9, 2008 I think you'd be better with a 35 profile on the rear and if you're still not happy you should look into a small drop. Wheels are looking good though and I wouldn't change the colour. Red wheels are cack BTW... I agree +2 or perhaps 40 would look even better Quote Link to comment Share on other sites More sharing options...
rickya Posted January 9, 2008 Share Posted January 9, 2008 As above definetley too low profile on rears: Im running 35 profile on rear & 40 on front: Quote Link to comment Share on other sites More sharing options...
Digsy Posted January 9, 2008 Share Posted January 9, 2008 I haven't got a calculator to hand but I would check that 40 profile doesn't increase the rolling radius too much before you go down that route. Quote Link to comment Share on other sites More sharing options...
rmmackfc Posted January 9, 2008 Share Posted January 9, 2008 This will help... http://www.alloywheels.com/tyrecalc.asp Quote Link to comment Share on other sites More sharing options...
ir_fuel Posted January 9, 2008 Share Posted January 9, 2008 As above definetley too low profile on rears: Im running 35 profile on rear & 40 on front: That height looks nice Some people lower too much, which makes the arches "eat" the wheels, that looks even worse imho Quote Link to comment Share on other sites More sharing options...
Jacko Posted January 9, 2008 Share Posted January 9, 2008 Go with +35 profile and go Gunmetal to look the bees..... Mine look spot on one same width of wheel on a +35 profile Quote Link to comment Share on other sites More sharing options...
Digsy Posted January 9, 2008 Share Posted January 9, 2008 Go with +35 profile and go Gunmetal to look the bees..... Mine look spot on one same width of wheel on a +35 profile They certainly do! Quote Link to comment Share on other sites More sharing options...
rickya Posted January 9, 2008 Share Posted January 9, 2008 That height looks nice Some people lower too much, which makes the arches "eat" the wheels, that looks even worse imho Cheers mate I havent lowered mine (std suspension on 19"s), but choices in tyre profile & offsets gives vastly differing results. Quote Link to comment Share on other sites More sharing options...
zebedee! Posted January 9, 2008 Author Share Posted January 9, 2008 Will post some pictures when i get them done. Need this damage sorting first: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.