Grundy Posted September 1, 2015 Share Posted September 1, 2015 (edited) **Mods Att - Sorry guys, in the middle of moving house this week, so the exhaust is in storage at a friends house (Pete, a member on here) untill I have my own place with storage. So apologies for no Data/Time stamp, I should have one up by next weekend. Would appricate the approval, as funds will help me get my new place ** Up for sale my fully custom stainless exhaust system. Includes a Fully one off custom Y pipe and Decats intergrated as one. Mileage: 20k DB: 87 - When I got sound tested at combe, static 4k revs was 87db. So perfect exhaust for track days. There is no drone with this exhaust. Why did I go custom? Because I wanted something different when attending meets, and it did the job, Full throttle and this exhaust is something completely different to static reving. The buyer will be very happy with this Condition: - 8/10 - Never been one for polishing my tips, so it has a lot of fumes/dirt attached to it. I shall polish this up before the buyer collects. Flexi's are in good condition - 1 is 100% fine, 1 is 90% fine, has some fraying (I must of clipped it on a bump, no holes or leaks though) Location: - Portsmouth - Collection only please, I'm usually happy to ship most products, however this is just too much of a PITA to package. Price: £400 (Includes everything, Decats/Y-pipe/Mid Pipe/Backbox.) This is a bespoke exhaust, that was built to fit my car. So it will fit any 03-06 UK Zeds. Not 100% on JDM models as I know there are some slight differences under the car. So buy at your own risk I'm afraid JDMers. Unfortunately I haven't taken any pictures when I took it off at the weekend. (in the process of moving house, so everything is up in the air at the moment, and the zorst is stored round a friends house) I will give the exhaust a good polish next weekend (if it hasn't sold by then) clean it up and get some fresh new pictures up. But here's some from when it was made and various other times. Reason for selling? Wanted something loud, single exit for 6 months. I was planning on keeping it and switching back next year, however the exhaust only lines up with the custom Y pipe, So I'd have to switch the entire system again. So easier to just sell and by another exhaust come next year. Again, these pictures are from when it was first made, and various times throughout the year. I shall get updated ones next week. Y Pipe/Decats in the back left of this one. Taken when the engine was switched. Edited October 22, 2015 by grundy225 2 Link to comment Share on other sites More sharing options...
Ebized Posted September 1, 2015 Share Posted September 1, 2015 · Hidden by ioneabee, September 1, 2015 - No reason given Hidden by ioneabee, September 1, 2015 - No reason given I doubt anyone will commit without up to date pics so Grundy gets his move funds. But happy to let it go given the description/pics provided. Link to comment
Neilp Posted September 1, 2015 Share Posted September 1, 2015 · Hidden by ioneabee, September 1, 2015 - No reason given Hidden by ioneabee, September 1, 2015 - No reason given Agreed, he's well know enough. Link to comment
ioneabee Posted September 1, 2015 Share Posted September 1, 2015 get fresh piccies as soon as you can Link to comment Share on other sites More sharing options...
Grundy Posted September 1, 2015 Author Share Posted September 1, 2015 get fresh piccies as soon as you can Cheers guys, I'll get them sorted asap Link to comment Share on other sites More sharing options...
JakeHardy2011 Posted September 2, 2015 Share Posted September 2, 2015 Looks amazing.. any chance of a sound clip too? Link to comment Share on other sites More sharing options...
Grundy Posted September 2, 2015 Author Share Posted September 2, 2015 Looks amazing.. any chance of a sound clip too? Sound clips at the bottom of the post bud. Obviously it's not that clean now as that was brand new 2 years ago I shall give it a good clean though and get some pictures up when I get a chance Link to comment Share on other sites More sharing options...
Grundy Posted September 2, 2015 Author Share Posted September 2, 2015 Looks amazing.. any chance of a sound clip too? I found with this exhaust that it's a bit unsuspecting. Subtle when poodling about town, but as soon as your up the throttle right up it comes alive. It's quite a throaty sound, not deep like a subaru - If you youtube some of the time attack 350z in the usa, it's the only cars I can really say it comes close to. Link to comment Share on other sites More sharing options...
JakeHardy2011 Posted September 2, 2015 Share Posted September 2, 2015 Okay thanks mate will have to check it out when I'm home as the browser at work wont display the clip so couldn't see it. Looking for a bit more noise than stock in the 2-4k rev range. I'm only 21 so noise is good, is 87db quiet compared to other aftermarket exhausts? Link to comment Share on other sites More sharing options...
Grundy Posted September 2, 2015 Author Share Posted September 2, 2015 Okay thanks mate will have to check it out when I'm home as the browser at work wont display the clip so couldn't see it. Looking for a bit more noise than stock in the 2-4k rev range. I'm only 21 so noise is good, is 87db quiet compared to other aftermarket exhausts? I'm about as ASBO as they come in the Zed world. A lot louder than stock. 87DB is at 3.5k/4k revs just holding the throttle. When driving it will be a lot higher. Video below - Only problem is, I have stillen headers now when that was taken, which changed the exhaust a lot....It's a lot more raspier in the video that it is without the headers. Link to comment Share on other sites More sharing options...
JakeHardy2011 Posted September 2, 2015 Share Posted September 2, 2015 Thanks for the vids just checked them out on my phone sounds pretty wicked! haha "ASBO"... I can tell by the huge wing lol car looks and sounds great. Might have to save up a bit for it thou. GLWTS 1 Link to comment Share on other sites More sharing options...
Hughesie90 Posted September 3, 2015 Share Posted September 3, 2015 anyoen able to confirm if this will indeed fit the import, i don't see why it wouldn't i may be interested. Link to comment Share on other sites More sharing options...
Grundy Posted September 3, 2015 Author Share Posted September 3, 2015 (edited) anyoen able to confirm if this will indeed fit the import, i don't see why it wouldn't i may be interested. The only thing I'm unsure of is Diff location. (I don't mean in a completely different place) Wasn't sure if I read somewhere that it was position slightly different to UK spec. Edit - To be fair now that I'm thinking about it, there shouldn't be an issue. As you don't buy a different exhaust for imports Edited September 3, 2015 by grundy225 Link to comment Share on other sites More sharing options...
Jetpilot Posted September 4, 2015 Share Posted September 4, 2015 The UK diff has additional cooling fins, it is in the same place just slightly bulkier because of the fins, sure this will be fine. Link to comment Share on other sites More sharing options...
sfield21 Posted September 5, 2015 Share Posted September 5, 2015 Pm'ed Link to comment Share on other sites More sharing options...
Grundy Posted September 13, 2015 Author Share Posted September 13, 2015 Link to comment Share on other sites More sharing options...
Grundy Posted September 22, 2015 Author Share Posted September 22, 2015 Link to comment Share on other sites More sharing options...
Humpy Posted September 22, 2015 Share Posted September 22, 2015 Thought this would of been snapped up ages ago. 1 Link to comment Share on other sites More sharing options...
Grundy Posted September 28, 2015 Author Share Posted September 28, 2015 Link to comment Share on other sites More sharing options...
alfa_owner Posted October 22, 2015 Share Posted October 22, 2015 Has it gone yet? Link to comment Share on other sites More sharing options...
veilside z Posted October 22, 2015 Share Posted October 22, 2015 Very nice system. Link to comment Share on other sites More sharing options...
Grundy Posted October 22, 2015 Author Share Posted October 22, 2015 Oops. Sold Link to comment Share on other sites More sharing options...
ioneabee Posted October 22, 2015 Share Posted October 22, 2015 Sold - thread locked Link to comment Share on other sites More sharing options...
Recommended Posts