Adrian@TORQEN Posted July 26, 2015 Share Posted July 26, 2015 (edited) Not sure if you remember from my 350z build thread, but will refresh this here. To eliminate the belt slipping, a famous mechanical engineer in USA did the "TimRod Radius Rod", which is basically a stiffener bracket that eliminates the flexing of the supercharger mounting plate. I had this fitted on my car and eliminated any belt slipping on the dyno and afterwards on the road. Here are some photos with the brackets in both variants, DE and RevUp, but also fitted on my car: Before fitting: Strut bar off, mockup fitting: Final fitting: Running: I recommend this to any of the guys going Vortech SC. The Radius Rod will support the SC mounting plate at the far end on the blower side, stopping any mounting plate flex, that will contribute to belt slip. There are lots of threads in the US forums, most of the Vortech guys have this fitted on their cars. TimRods car is featured on Vortech's site here: http://www.vortechsuperchargers.com/page.php?id=42331 you can see the bracket fitted in the photo with his engine bay. TimRod holds the record for the fastest untouched stock engine with Vortech SC, 10.903 @ 130.30 mph. I've spoken to him again, after bringing this to UK for a few members in here back in 2013 and I will be importing a few more now. Price: £229 delivered to your door. If you're interested, please let me know on this thread. We need minimum 5. Thanks, Adrian Edited July 27, 2015 by octet@TORQEN Quote Link to comment Share on other sites More sharing options...
Ogman Posted July 27, 2015 Share Posted July 27, 2015 I'm in....let us know about prices when you can! Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted July 27, 2015 Author Share Posted July 27, 2015 Spoke to Tim yesterday, he said he can do a minimum of 5 only. Price in the original post. Quote Link to comment Share on other sites More sharing options...
Ogman Posted July 27, 2015 Share Posted July 27, 2015 OK - I'll start a list then:- 1. Ogman 2. 3. 4. 5. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted August 16, 2015 Author Share Posted August 16, 2015 Anymore guys interested in the bracket? Quote Link to comment Share on other sites More sharing options...
KOF Posted September 16, 2015 Share Posted September 16, 2015 Hay Still available? Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted September 16, 2015 Author Share Posted September 16, 2015 Yes, should I add you to the list? Quote Link to comment Share on other sites More sharing options...
Mike_89 Posted September 25, 2015 Share Posted September 25, 2015 (edited) I'm interested in one of these, however due to purchasing a house this month. It will have to be on next months car parts list. Edited September 25, 2015 by Mike_89 Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted September 25, 2015 Author Share Posted September 25, 2015 1. Ogman 2. KOF 3. Mike_89 4. 5. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted October 6, 2015 Author Share Posted October 6, 2015 1. Ogman 2. KOF 3. Mike_89 4. tomzzzcattle 5. One more needed to go ahead Quote Link to comment Share on other sites More sharing options...
tomzzzcattle Posted October 6, 2015 Share Posted October 6, 2015 Hi all, I have just put my name down for one of these, as I believe a modification that keeps your supercharger belts safe and in place is money well spent! Looking forward to receiving it Cheers, Tom. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted October 24, 2015 Author Share Posted October 24, 2015 We now have 5 members, but I'll live this open in case somebody else wants one. 1. Ogman - RevUp DE 2. KOF - Standard DE 3. Mike_89 - Standard DE 4. tomzzzcattle - Standard DE 5. AngryHippo - Standard DE Please confirm your engine type, either Standard DE or RevUp if I've got it wrong in the list above. I'll get Tim to manufacture these and send you invoices via PM now. Thanks guys! Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted December 15, 2015 Author Share Posted December 15, 2015 Guys, These have arrived today, trying to ship them out in the morning. Adrian Quote Link to comment Share on other sites More sharing options...
tomzzzcattle Posted December 15, 2015 Share Posted December 15, 2015 Great! look forward to receiving it Cheers, Tom. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted December 17, 2015 Author Share Posted December 17, 2015 All shipped today, sorry for the delay! Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted January 13, 2016 Author Share Posted January 13, 2016 One more in stock for 350z standard DE engine, ready to go for next day delivery. Quote Link to comment Share on other sites More sharing options...
Adrian@TORQEN Posted February 8, 2016 Author Share Posted February 8, 2016 Last one in stock for 350z DE. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.