nurrish

Ahhhh i was looking for a plenum spacer with ports...this will do the job nicely

I have had a look on his site but failed to yield any results...i actually have a spacer here with me.....it might be easier/less risky to tap that first

Mmmmmmm three nipples

O really? i shall go and have a butchers

With my setup i need to run atleast 3 valves into the plenum...the easiest route is to take a t off the nipple...but this could lead to problems and incorrect readings...so to tap the plenum is to add more nipples!

Didn't realise there was still so much to do Going to be a busy christmas break Drain Oil Mount oil cooler and run piping Refill Oil Install belts Fit Fuel Rails Fit Injectors Fit Fuel Pump Route Fuel Return System Mount Utec ECU Tap Plenum Run pipe from BPV to plenum Run utec boost sensor to plenum Install aem gauge install boost gauge Fit spark Plugs Reassemble Mount mesh in front bumper Fit exhaust Tune

I have been running BC Coilovers for a few months now. Have even tracked my car with them and the handling was superb. Even on the road they take the car to the next level in terms of handling and drive ability. Also they can be setup to your own spec Value for money with excellent quality which you cant beat for the price.....I got mine from CS who also fitted them

Welcome Please dont talk as much as GT4 Zed though

Sounds like we could have a good competition..... Name the member from behind

So this is probably the last update until i receive more bits....waiting on my AAM Fuel kit and walbro 255 pump. Broke the back of the job this weekend by getting the blower mounted and the pipes sorted ready to fit straight into my engine intake. This week i will probably get the belts on the stock cogs and onto the blower block... This leaves me to fit my injectors,oil cooler, larger oil pan, spark plugs, fuel rails, fuel return and fuel pump....Then she's getting 6 litres of the finest oil...plug in my utec and away she goes fingers crossed O and remember where all these random bolts i have laying around have come from Anyway last pic's as it is now having sold my carbon bonnet

THAT IS AWESOME So buying that tomorrow

Take a quick snap with your phone/camera...im eager to see what it is then i will have to buy it tomorrow

say whaaaaat? this months???

im just happy my bonnet closes with everything under there

Starting to look like wacky races

Of course i'd wished i'd of kept it.......shall get one again in the new year though To be honest i really really like it i will get a pic up of it tomorrow

I AM SOOOO NOT JEALOUS Maaaaaan that loooooooks so nice

Thanks matey

Yeah no whacky bonnet required But seriously this job is not for the faint hearted....the pipe down into the engine bay has about 1mm of room to move to get it to fit.....i resorted to a long file and a mallet Then you have to align it to the pipe underneath....needs to be **** on otherwise you wont get a correct fitment and lead to leakages

Loads a room

Trying to......losing alot of blood though!!! My engine bay is covered in it

WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO I have just finished the most tedious, annoying arse aching job of getting he piping up through the engine bay NEVER AGAIN WILL I DO THIS Anyway pics

Yeah mate i will be here......fitting a sat nav at the same time too

Some strong mesh.......in black/grey

The piping is proving to be an absolute nightmare