Jump to content

Darren-B

Members
  • Posts

    6,092
  • Joined

  • Last visited

Everything posted by Darren-B

  1. Just tread carefully with Admiral, any changes made upon the policy, ensure you have them in writing. Last year I had a muti car policy for the zed & merc. I phoned them to remove the zed only from the policy as they wouldn`t insure the SC mods & they said they would refund me the prepaid monies remaining on the policy. This was in April, I later sold my merc in August & phoned to change the policy over to the new motor to find that the clown had cancelled my entire policy & I had been driving around technically uninsured for months Can`t beat going to a broker. You can talk to a real human being, normally the same one each time & tailor your insurance to your specific needs @ a surprisingly good rate considering the far superior service they provide.
  2. I had a problem similar to this a few years back when cornering left @ speed. Got black flagged for it on track. Went over the car checking every moving part & changed pads/disks, & it ended up being the metal dust shield behind the nearside brake, it was just touching the disk under extrreme cornering. But as stevo said it`s likely to be low pads.
  3. Well she wasn`t speeding when I saw her,
  4. 1. Wizard: Vortech v3 3:13 pulley, 'DE bone stock motor, 13psi, Uprev tune, 450rwhp / 400lb/ft, Over 10K boosted miles so far. 2. Sam McGoo:Vortech V2 3"33 pulley,'54 DE stock engine,9.14psi,Uprev@Abbey, 402 HP/336lb/ft @Hubs 25k boosted on a 27k engine. 3. 4Re Leather. GTM S/C. Small pulley. 2009 HR Stock Engine. 10.35 Boost, 464.5bhp/383.3Ib/ft @ Hubs 2k boosted on a 17k Engine 4.Oskaben Vortech v2 Supercharger, no idea about anything else until mark at abbey takes it off the standard vortech fuelling and tunes it correctly! 5k boosted on 36k engine. 5.Darren-b Vortech V3 standard pulley,'54 DE stock engine,???psi,Uprev@Abbey, 429 HP/???lb/ft @Hubs 7k boosted on a 68k engine.
  5. Darren-b Vortech V3 standard pulley,'54 DE stock engine,???psi,Uprev@Abbey, 429 HP/???lb/ft @Hubs 7k boosted on a 68k engine.
  6. I spotted Mary this morning in the Leon Dave, couldn`t catch up as my van is fubered
  7. I`d hope to be the last one pulled by the fuzz too With the noise on yours? Anyway I'm so overt it's convert haha Believe it or not part of my exhaust has a quiet milltek stamp on it. Not sure if theres anything in terms of baffles left inside of it though
  8. What like wearing florescent orange in the forest so the bears can`t see you?
  9. I`ve always used neutral curing silicone for my badges/ numberplates,
  10. Yes it will be interesting for you. I went in it before it was running full power & that was certainly fun
  11. That woman " Manually skilled workers" wtf look @ the stat of her kitchen
  12. Is that including the speed #######?
  13. You haven`t been in my garage recently, think I`m due to find me a woman
  14. I want to take the zed there
  15. I`ve always been like this, before the Zed the longest I ever owned a car was 12months. I`ve had my zed for over 5years now & still enjoy it everytime I drive it. I think the main reason why I still have it though is down to this forum, the events & so many great friends I have met from all over the country
  16. Same spec but the one before it. Mine doesn`t have touch screen, it has a remote. Be warned though, I`ve had trouble with mine & PLX are VERY UNHELPFUL & DO NOT PLAY BALL WITH CUSTOMER COMPLAINTS. I have an issue with my control unit emitting some kind of signal that disrupts GPS aerials & the radio signal. When the unit is plugged in it reduces the signals massively. I`ve tried repositioning the device all around the car, different power sources & basically if its powered up within 2metres of the car the radio & GPS signals are affected I should hope that this is just a one off issue with my particular device, but with the lack of customer service & PLX being situated in the US I can`t easily knock on their door & hit them in the face with it. Personally from my experience with PLX I would NEVER buy anything from them again & would not recommend them to anyone. On the other hand it does do what it says on the box, apart from you can only organise daisy chained modules on the main screen. You can`t pull obd modules & mix them with an additional module. For example I wanted to monitor 4 sensors, Oil temp, water temp, afr & inlet temp(obd-2) You can`t add the obd sensor to the list.
  17. I have the Dm-100 Adrian, with OBD-2, water temp, oil temp & AFR modules
  18. This could be added to events for Wales 2013
×
×
  • Create New...