3FIDDYZ

Daytona Stainless steel is only about 4.5k but you have to pay a premium of about 2k at the moment. When I used to sell them we used to get a "tip" for calling up a dealer and telling them when we had them in stock...wished I had bought a few as I would have made more than I made in tips! Shame its not a real rolex though.... Its like buying a farrari with a Jaguar engine in it.... Still one of my faves though..

I thought they did - 225BHp TT? Anyway, aside from that I could get your TT to much higher power, with some wire applied to your wastegate to keep it shut Yeh there are 2 different TT's one comes with an additional styling pack, including hair straighteners, clips, hairspray and hair extensions...

Fair enough, just thought they were supposed to be close to drive the air directly into the filter, there may be a bit of turbulance in that area due to air coming up from under the car. Anyway yours works Ian so I stand corrected

I do know someone that has a Unichip with mods and is running at about 338BHP and it cost him about £850 fitted... Will be going the same route as him. Pain in the arse thing is that they could have put in a ECU that stopped you going over say 350bhp after you had modded it. If you chose not to mod it would have stayed at the 280 stock figure.

Think Arc do a nice shiny one Induction Box (just trying to remember if you need to use it with an Arc panel filter...) . Looks great with the Arc cooling panel. Also, and please someone feel free to correct me if I am wrong, but your filter looks very set back from where the air come in off the grill. I belive it needs to be as close as possible to the hole in the bumber in order to get as much air as possible into the CAI. You may need a new intake pipe like this one http://www.envyperformance.com/index.cf ... ct_ID=7858 Mark

Exhaust is £795 Pleased you like it Alex. Fitted ? Is that an order? Well not quite, but my warranty runs out end of March Despite your sage advice the Nismo is a little muted for my taste. Suits a Blade Silver (IMO) so am sure it will suit an Azure!! Dont forget the Y-Pipe (Not sure if Phils cost includes that) and the high flows as it all adds to the "Sound Track"!!!

Dont often come out with it but "Told Ya So"!!! Looks great too Lexx Enjoy

Top looking car mate Glad you are enjoying it, Seems like it was worth the wait. Looking forward to seeing it at a meet.

Checked under the poly whatsit bits in the boot for a wheel lock key or something? Or could be a clicky drive shaft.... Also try giving the plastic covers a bang as they can sometimes pop off... Want to tell us more about the type of rattle? Or even a video clip!

Here you go marzman, pictures for you, http://forums.DELETED.com//ind ... ntry168530 got them from Delsea Motorsports in the states, very quick service, got other carbon bits at the same time. Fitting was pretty easy. I think they add a little something else to the car. If your interested in other aftermarket lights, have a google search for Clearcorners, not cheap but look amazing IMO. Mark

About the same amount as it would have been unworn, perhaps a 5% increase, in 25 years you may be looking at a 35% increase due to its limited status... If you look at page 4 on this site Lot 398 http://www.artcurial.com/pdf/presse/2007/r1261.pdf I sold a series of these watches that came in a group of 6... I think that they were about 20k each and this one sold for 50k euros... Not a bad return in 17 years!! If he had have sold all 6 he would have made alot more money... Big Phil, nice collection mate

Get a head unit like the Sony or kenwood one with bluetooth phone and ipod control, only single din but you can get a housing so it looks fitted if you dont want to spend loads. You can get aftermarket double dins that are far better than the stock.... If you want to spend a few quid then get the kenwood / alpine or clarion dvd unit without the sat nav but with the bluetooth and ipod and then you have a 2 screen setup. You can still use all the steering wheel controls for changing station track etc and having the ipod intergration means you can stick your ipod in the cubby and forget about it!! Sat nav on the nissan birdview one uses a seperate speaked anyway so you wont lose that.

Could be your window winder, I had it happen to me, and its been noted lots of times on the Coupe's. It seems to be the first stage to the winder motor failing and needing to be replaced... As martin says, if its not dropping a couple of mm then there is a problem as its not sealing correctly. Gonna be a wtee issue with Nissan probably. so get the owner to sort if before you purchase.

Some of the watches that some in at that cost take about the same amount of time and effort just that there more hand made and alot smaller !!!

I know an owner who is getting 330ish from a mapped and chipped engine, Not Fcon but Unichip.... Cost is alot less too... RJN have a great NA reputation too.... You get a stronger engine too...

I think thats what he has, its huge dont like it. Mum and dad both have Cartier watches, never understood how you can justify 16k for a watch I like the watches that have calculator and can change the tv channels lol In the world of watches 16k can be classed at the lower end of the market!! Most expensive ONE i Sold was just short of 100k and there wasnt a diamond on it!! Suppose its subjective, after all we could all buy 2nd hand saxos or 205's but we buy a nicer car and then spend cash on them to make them nicer...

And how much do they cost? More or less than £100? I have the same issues with watches as he More!! Classy watch though...

Nice Omega, love the dual display. Had the Brietling titanium version with the same movement. The cosmograph range they make are massive beasts...

Chesterfield, If you scratch watches get one of the ceramic Rado's waterresistant to 50m (perhaps more...) and scratch proof case and braclet... Fortunatly I used to be in the jewellery trade so am currently sporting a lovely Panerai. Got a fair collection of other watches too...

Nice Andy, am considering those for mine... Were the sub frames hard to do or have you got access to necessary tools and equipment? Was bidding on some Recaros on Ebay the other week which would have suited the Zed, but those Cobras look the part. I sat in Kev from Envys car and they felt firm and gave support in the right places but were comfey too.

Not that well known in the UK, they get sold on QVC and the like over here and some shops. I think most people think they are Rolex Copies and as they are not sold in jewellers they arnt that good. Movements are good for the money though.

Its not hard to bypass the seat air bag, you can buy a kit to do so, and then all the other airbags work...

To put the car in to a context we could all afford... http://uk.youtube.com/watch?v=VEL5ABddZ0k Few more interesting ones for you.... http://uk.youtube.com/watch?v=_Pxs-dWwxaE http://uk.youtube.com/watch?v=OQZ34B1Q5-0 just love the way the cheapest car is the quickest....

Does the Zorst cost include the Y-pipe? Just checking as I didnt factor that in when I upgraded to a 5Zigen. No regrets there though... Lovely sound Hiflows are being fitted very soon. Decats mean mucking around to get them on / off before MOT time too! Either replacing the coilovers with RS*R's or K&W Varient 3's do the trick. Went RS*R Sports and the handling is affected...... FOR THE BETTER!! 32 way adjustable for the compression and ability to alter ride hight... Shocks and Springs are also an option, i know a few owners that went down that route and are more than happy, cost is alot less than a full set of coilovers! You should be able to get the above and the Rotas for your budget. Or just over.. 19's for show, 18's for go is a saying that gets bounded about!! but you are looking at more money for 19's from any brand... PS I do take it you have changed the CAI, fitted the Plenum spacer and a grounding kit? i.e stage 1 mods!

Is that car that Jurgan was selling? Cant remember his company name.. Great looking car mate, kit and wheels look spot on.