3FIDDYZ

If your lookin at FI then djtimodj's weekend project is pretty good, if its NA there isnt many one here but the abbey motorsport area in traders has stuff. Apart from that, check out my350z.com and their NA and FI sections. you will be reading all night over there!

Lol!! Nice.... Learn the Zed first

Not just the yanks... On a slammed car it looks great and you need it too get the rims outside the arch and so you can turn the wheels! I thought it was Illegal for any part of the wheel or tyre to protrude beyond the bodywork - something to do with pedestrian protection Top of the wheel is almost inline with the arch... law says nothing about camber And Ian... you know you dont want a GT-R anymore!!

What did you come from car wise? IMO I would just get used to the car and do your research. happy to give advise when you have had a read and found out more.. and more about the car I think Andy did a guide in the guide section on here, lefthand side bank is easy to get too, right is a bit more of a pain but doable. You will see them under the plenum (big silver thing in the middle!) if you look at the oil cap, go straight back about 6 inchs and you will see 3 plastic blocks about 2x2 inch about 4 inchs apart. These are the coil packs, under there are the sparks Shame you cant make the meet but am sure others will be going on soon!

By the looks of it your bottom nav has satnav on it, have you hit the nav button on the bottom right or hit the button on the touch screen? On the bottom unit by the way!

Abbey Motorsport will be the guys to go to then when you need a Uprev reflash once you have a few mods! There near redhill in surrey. Also if your up for a meet there is one coming up with a few more Zed owners not far from you. viewtopic.php?f=19&t=31955 Satnav. no chance unless you want to pay! Whats the main HU, Kenwood? You may be better off getting satnav into that and then use the top screen for something else! Sparks you can do if your good with the spanners. 90 for the sparks approx. If your not good with the spanners then Abbey will sort you and for a lot less! Do you know when they were last done? Mark

What is it with Septics and over stretched tyres? That needs at least 30 mm more on the rear profile and 20mm at the front Not just the yanks... On a slammed car it looks great and you need it too get the rims outside the arch and so you can turn the wheels!

A good search will give you that info 300bhp on a 276bhp is a push and it depends on what you got on it already. Only just got 280 ish at the hubs and its not an easy (or cheap experience) You will need intake, plenum spacer, exhaust manifolds, decats, y-pipe, exhaust and a remap.... and lots of patience (and be prepared for some heartache!) Sorry to burst your bubble on your first day at school! Where you based?

Its dcash5's car !!!!! (Not really but its his almost twin, different skirts! and his kit is moulded in and has a few more mods!) The kit on your azure is an Ings kit, great choice. Nice motor and lots of potential

That price was them shipping but is also based on the £/$ rate about a year ago Get a price on the wheels and then let me know, will then PM you the number of a mate that runs a couriors who can give you a price for collection. You will need a full collection address. There are a couple of traders on my350z that are doign a deal, just pm them asking for a collection price. They do look good and a great price. And yep, they open the wheels up so you do need to change the brake colour! Would go red or black...

Honour will be ours mate And you used the same thought process as me!! Dealer fit after market option Tsk Tsk young jedi's!!

Cheers mate It helps with my dememture You need to lower it slightly though This works out the be about 30mm

I should have said I'd trawled that one, and the Silver threads etc, but I think the pic I saw was on an obscure thread, like a fake Nismo thread where a customer has bought the product and put a picture of what they did with it (if that makes sense). That V2 thread is awesome tho This?

Veilside V1 add on

It was the camera detector in place of the ash tray that made me think, I remember seeing a guide for that somewhere It seems very familier to me... just going through all my pics!! Think a few people had the pogo though!

Thanks for that I will give them a call tomorrow, I would prefer the 'two tone' effect. They definitely need to be harder wearing, I take them off for the winter but that still didn't prevent the chrome flaking off. The guys at the platers were very dismissive of the 'cheap Jap chroming' saying that it never lasts long - wish I'd known that when i bought them!! Hmm I wouldnt say its cheap jap, its just that they use more salt here I think... made the mistake on mine of leaving them for about 3 weeks after loads of motorway and they were never right again... You could always go phantom!! Saw someone on my350 that had done a 2 tone effect on the spokes (if you imagine the face of the star was chrome and the sides were matt black) and he had phantomed the rims.. looked smart on a black car... Always thought these could take a bit of red in them! What colours your car?

you haven't taught her very well then! First time she got in I forgot to tell her to put the clutch in.... Told her it was broken so she had to take hers!! Sshe worked it out though!

One thing I have learned with the zed... leave it in gear! You need to put your clutch down to start so no worries there... esp when your Mrs's gets in the car and dosnt check to make sure its in gear anyway!

As your in South London I can highly recommend Wicked Wheels in Crawley 01293 527 733. Not many places will work with split rims but they did a great job of my GT-S's Love the all matt black volks but as a split I think they look better as a two-tone. They can also re chrome the lips but personally for a bit of longevity I would go for a harder wearing finish. The guys at WW should be able to give you an idea, think your looking at about £65 to £75 a wheel for a refurb

I should have said I'd trawled that one, and the Silver threads etc, but I think the pic I saw was on an obscure thread, like a fake Nismo thread where a customer has bought the product and put a picture of what they did with it (if that makes sense). That V2 thread is awesome tho Anyway, here's my contribution to the thread Can remember if this was posted..

On a nismo car I think they suit it. Just the sides, not the bonnet IMO On a bogo they dont!

Hi Mate, saw your PM and unfortunatly I dont do parts!!! Or any other trading for that matter! I thought Andy Kudos had one for sale?

Good patience!! If it was me I would have had the drimel out and cut it off and then got hold a door card!

This one? No, the pic I remember was in side profile, and was a silver V2, with black/red canards and a black strip at the bottom, but also had red sections on it. It looked pretty awesome in my opinion, but can't find it anywhere now. . .maybe I imagined it. . . Thanks for trying to help tho Mark Found this too..Evil!!

what does th gt pack include , leather interior ,rays alloys, sat nav ,bose sound system what else ? coz this 350z seems to have all that all that but dosent have th rays Heated seats, steering wheel controls for radio etc, cruise control and probs some other stuff ive forgot, it looks like a pretty mint z though, but to be honest if i were you id go for a gt pack one, you may regret it later on. Unless your going to want to mod it! Then go base!