ColinS

It's for looks mainly but moving to larger disks I think should reduce the pressure from pads for the same braking which increases pedal feel and reduces heat. I know my stopping distance won't change (planning on doing the rear too) I'll hardly notice any difference so as said mainly looks. Oh and yea by 'spacer' I mean bracket to move the caliper out.

Custom "spacers" phil.

would be tight, which discs are you thinking of using. Tight but ok? I'm looking to up the diameter and move to a 2 piece but can't on 30mm disks.

Yea sorry guys, I am talking about the width of the disk and the front. 32mm diameter would be awfully small lol I know the standard with is 30mm just wonder if the caliper could handle an extra 2mm. That was typo buddy, thanks. Now I don't look like one of the fools who call it greedy.

Anyone know?

Nope, nothing. Just went out this morning and it was dented and scratched.

Some f*cking w@nker hit my rear wing last night and f*cked off. Scum of the f*cking earth.

Rough price for it and an OMEX to go along with it supplied, fitted and mapped and a custom air box from ITG is £4.5k

Top Secret kit is way over priced and is mounted at the completely wrong angle compaired to the ports. There are NO figures on power gains as only race teams have done it along with a fully built engine. Only thing to say is ITBs don't make big peak power gains, it's all about under the graph with them.

It's not that i am using the poll to make my decision, was just wondering what peoples thoughts were. Would liked to have seen results from the poll that regardless of cost what do people like better, what would people prefer to drive etc

lol there is no plenum to allow both at the moment.

Where did £1500 come from? No one knows, as no one has done it. Only race teams. I have a VERY nice clip of one on my phone i'll load up tonight when i get home. You don't normally run it op like that, an airbox would normally be fitted round it. Top Secret Kit Massive Pic: http://www.topsecretjpn.com/products/vq35itbx.jpg

Forget the cost just now, if you were given the choice of a free low pressure TT or an ITB kit fitted to your car what would you choose? Jenvey do a kit: admin note: pic removed, inadvertantly linked to a site that search engines report as malware

Only one that's out: http://gtmotorsports.com/product.php?pr ... 258&page=1 If you are thinking about it maybe we can buy 2 and get a better price and combined shipping.

Not so sure TTs are cheaper, esp for the HR.

If you had the choice what would you prefer for your Z?

The bucket type seats just remind me of the chavvy seats I see in the local chav-mobiles......... The thick leather Brides 'look' expensive imo Thanks, deffo not getting them now

What about these Recaros?

I like the first one but was thinking of them being slippy and also the mesh would be more comfy to sit on; doesn’t get burning hot or freezing. I do like the look of the leather though. Consensus seems to be for the XAXII, any reason you guys don't like the Vorga?

Bride XAXII in full black leather Bride XAXII in black leather and high grade mesh Bride Vorga in black fabric and high grade mesh

Does ERS have a website? The garage may be a good idea, had some dealings with them awhile ago about a skyline. I'm in Prestwick buddy

As title, as close to South-west Scotland as possible but willing to travel. Looking to have my coilovers, camber, toe, spring preload, sways etc all setup. Thanks Colin

There is a big gap at the bottom, if you hava a double din do not get the facia linked above. My digital camera is not working so i put a red line on the pic attached to show you where the big gap is.

Probably fed up with Double Din questions but i need some help. Just fitted a double din unit today using the following adapter however it has a big gap at the bottom, anyone know a brand that has a larger bit at the bottom to stop me getting this gap like the pic below: Current Facia; http://www.caraudiodirect.co.uk/nissan- ... 9d0da80b97 One i want: Thanks Colin

I've seen it on m my350z and was wondeirng if anyone over here has done it. The guy over there will not share what LEDs he is using etc as he is offering it as a service however it woudl cost too much to send the stuff over. Just really need to know what LEDs to use etc as you said it is not easy.