Possibly but where it is now makes it easier to access, there is an attachment you can buy to mount it to the rearview mirror. As for the rest of it, its not a lot bigger than what you see. 2 Connectors 1 at the back ?& 1 at the side.
Cusco Zero-2 coilovers with cusco ARBs on mine
A bit bumpier than oem but i've got mine set to the middle stiffness. Mine is dropped on 19s & didnt need camber arms, I'm running a bit of negative camber but not a huge amount
No alarms. Only other info is the manifold pressure & Ignition timing but they dont work on the Z.
Also has a trip computer but untill I fill the car up I cant set that up. Trip computer when setup shows
* Maximum Speed
* Average Speed
* Maximum Coolant Temperature
* Maximum RPM
* Driving Time
* Driving Distance
* Fuel Used
* Trip Fuel Economy
* Distance to Empty
* Time to Empty
* Fuel to Empty
Gonna fiddle around with the Xgauge part of it once its all fited properly
I'll have a look for the hole later
+1
Ive currently got a majorly scraped underside lip, my undertray is hanging off, my y-pipe has a huge dent in it, the gasket between the mid pipe & back box is blowing a bit & my back box hits most speed bumps
well sort of fitted, Just need to figure out the best way to run the cable
The unit
Unit fitted
Cable is small enough not to stick out from OBD port
Only things that it doesn't pick up is Manifold Pressure & Ignition timing
At the moment the first 3 settings are set to - MPH, Battery Voltage & RPM.
Intake temp
Engine Load
MPG
Throttle position
Water Temp
No Codes
Just waiting for my CEL to come back on now so I can test the code reading part of it
Any ideas on the best way to route the cable? Current plan is to maybe run it behind the dash
Ian what software / lead do you use to read the codes?
I have VCDS from my old SEAT and wondered if this will read generic OBD2 codes on the Z?
Current software is Digimoto used with an obd reader I bought from a member here
Just took delivery of my scangauge so about to go & see what it does
That is something I thought about....
I really like them but I'm a fatty so probably wouldn't fit!
I sat in Zedrushes seats at Japfest last year & I fit ok & im a fatty