ben@RARE RIMS

I think it's just a form of anodising Bit more involved than painting.

We dont have the bronze paint code... I am waiting for Rota to get back to me with it, so I can be sure to get you the correct code

Tyre sizes/prices can be found here, along with the prices viewtopic.php?f=38&t=24584&start=0 With regards what they're called... They're Linea Corse Dyna wheels, which is another brand made by Rota.

That was indeed magor... where engine 1 (rb26) released its grip on life, and so the plot for engine 2 (rb30) began.

They're just the job! Thanks for those pictures. Looks like you would benefit from getting in touch about those big brake kits

We have been sent these: I thought you chaps might be interested

Just for you...

We could get wheels repainted in that bronze colour, but if they have any marks on it ends up being fairly pricey with our local chaps, going to a local wheel refinisher might work out more economical. My S15 is something of a WIP at the moment, here's a recent picture or two.

Bronze could work out pretty well viewtopic.php?f=38&t=25105

Green ones to match Takata harnesses! Funny you should say that... We have some Takata Green torques going at the moment that somebody had sprayed up then had to cancel on....

Glad they arrived ok Hope you're happy with them, when I had a look over the marked ones before they left they weren't bad at all, which is pretty good These are Bronze, but as you can see, they're quite a dark bronze, the same bronze as the 19" GTRs, and will work with most 350Z colours

Lockers £20 a set. Steel nuts £1 each. Lightweight nuts £3 each. We can also supply tuner nuts (internal drive nuts) at £1 each.

Not at all... just hard to know how things are meant when they're written on the interweb

I think you'll find they are large, heavy and have big engines... So when fitted to nice small sporty cars, offer a significant improvement I know... I had them on my S14a! They fill wheels nicely too No lost little brake discs behind big shiney wheels

Part number for calipers is: 7L6615150 - that's a VW part number I believe for them

Thanks for those pictures, they look the part I hope you dont mind me linking them in to this thread? If so I'll take them off Ben

Thank you very much for your kind words Mike. I am glad you like them, really do look to be the perfect fit

This indeed just fronts, not all 4 I have them under R34GTR wheels, and they'll fit under Rota 18s including the GTRs. You need about 420mm internal diameter to fit them. I am not suggesting fittnig smaller pads, I am saying that the pads in your standard calipers will not sweep all of a disc that is significantly larger than standard. This kit is made by one of our wheel dealers, and put together from buying the bits seperately. This is why it is not a known kit, and not in catalogues I will get the pricing on the 2 piece discs tomorrow all being well, but expect them not to be overly cheap, probably a £250 option on top of the ones offered worst case.

You most certainly can

They could be, but there would be an unswept area and would need different brackets making up. I will investigate some prices on those too We can put Decals on if you like, pretty much of your choice I had these on my S14a and I can report them to be epic when combined with Z33 rear calipers / discs.

It's genuine brembo calipers and discs, but not a brembo kit, as they're hugely expensive. I'll find the part numbers on them for you

360mm Big Brake Kit The calipers are Genuine Brembo 6 pot calipers, similar to the ones found on the Porsche Cayenne, GT3 RS, Carrera GT, Lamborghini Gallardo and many others. Most of these are 200+ mph cars and if they stop them they will stop you aswell. The calipers come as standard with EBC Redstuff pads, but these can be changed for DS2500 pads for a little extra. The discs are 360mm Brembo discs, and as with the above kits can be plain or grooved. I am also working out a price for 2 piece discs, just finalising prices now. The above kit is a serious front brake set-up with no compromises on branding The kit is available with black/charcoal calipers as standard or I can turn them other colours for you for once again a little extra. If there's interest, I would like to set up a group buy on them Prices will be about £950 including braided hoses, full fitting kit and grooved discs. It's a few £s cheaper without the grooves.

Any more thoughts on these people?

So... has anybody got any good pictures of these fitted yet?

Sold!