Lexx

See various claims online that the 6 is developing a bend if kept in a pocket when sitting down etc. Probably BS.

The Team are looking for a member to volunteer to be the club's National Events Organiser. Your role would involve organising the club's presence at the major (and minor) annual shows, as well as liaising with the NEO of 300zx.co.uk and Z-Club for the events where we have a joint stand. Please either express your interest below or send me a PM. Please note that there is only one position available, and in the event of more than one person volunteering the Team will choose the person they think most suitable. (Also note that NEO is not a moderator position). Cheers Lexx.

Faulty relay would be my guess. Find the lighting relay in the fuse board and switch it out with another that you know works.

Make sure you use plenty of brake cleaner agitate it with a stiff brush. You need them to be as clean as possible. Quick scrub with wire wool. Chances are they are scuffed enough already from normal use. use a very fine, good quality brush if you are using tins of hammerite, and do it in 3 or 4 really fine layers.

Shouldn't have an issue with that. I had 3 sets replaced by Mazda with the same issue right up until the warranty expired. It's easier for a dealer to replace rather than refurb. They send the corroded ones back to HQ.

Contact "mondo" on here. He is a trader and does interior retrims. If you look in the "Hide n Seat" subforum you will see example of his work, including the full retrim he has just done on a members car this week.

Yup. £6750 First line of post.

Oh it's not essential, but JDM cars don't come with them as standard so it's a nice upgrade to have. The standard brakes will stop you, they're just not fantastic. A set of Brembo's will set you back £500. Maybe gives you a some room to negotiate if it doesn't have them.

It will have been imported into the UK in 2006. But it'll be a 2002 car. Mind and check to see if it has had the brakes upgraded to Brembo's.

I know you could just drive off and not pay for the person behind. BUT, basically you are still buying a coffee so in essence still paying for what you are getting. So generosity wise.....er.....it's not exactly charity is it.

I still have this due to being let down by a buyer.

Approved based on fact that Chris is a trusted trader, and "offered parts" could be wide ranging and would be ridiculous to ask him to take a pic with username on for every item he sells.

It'd be a dull place without you Neil!

Looks to me like it's been refurbed. Probably had a gouge in a spoke and they've been ground and polished put. If you have an accurate vernier gauge you could measure the width of the spokes. Though there would be variation in the manufacturing process itself so you would have to bare that in mind when interpreting the results.

It gets worse with each update though.

Start with this: http://www.350z-uk.com/topic/79656-all-encompassing-wheel-size-offset-thread/ wheel width and offset are the critical points you need to understand.

I have locked your other thread on this exact topic. Please keep to one thread. It makes it easier for people to search in the future.

You already have a thread about this exact topic. Please stick to only one thread. Locking this.

The Z33 prefers a staggered set up. Have a look in the Wheels and FAQ subforums, there is info there on the right offsets required and correct rolling radius for different size wheel/tyre combos

I spoke to Rich about it a while back. He said it's easier to buy direct from Hexis or such places.

Volkwagen Audi Group

They have a certain amount of cool attached to them. I'd much rather have a Largo/Bongo/Elgrand than anything that comes out of the VAG.

At least Apple tend to add to functionality rather than removing it. Every update of Chrome or Android OS seems to remove the best bits. The last update of Chrome removed the refresh button FFS!

Good to hear a positive review about a courier for once. Sadly, I find that whilst a courier company may be great as a whole, it's the individuals within the organisation who can let it down.

Did you completely miss why we locked the other threads Will? This is not a politics forum and people who are usually friends on here were turning against each other. I said we can have a thread about the result when it is revealed. And that still stands. I'm locking this simply because it is antagonistic. Posting about the rest of the UK voting to keep Scotland or not is the kind of off the cuff comment that starts threads like those going down hill.