Jay zee

You not sticking some clears on the RX?🫠😂

And there we have it. Old lights sold within 12 hours and my money back. Resistors came today but was busy so I'll give them a go next weekend👍🏼

Why am I just finding out now that there's clear lights🤩 Clears with LED's it is! Thanks for that!

Jesus they're miles better man! I've been looking at the full led strip some people run. Watching some on Ali express atm. I'll probably set the car on fire with my wiring though🤓

You wouldn't remember the name of the brand would you? Does the white light in the switch back run constantly then turn amber when signalling?

They came with my HR's to fit to my DE. I have no use for them. Will hopefully help a fellow Z owner. Just drop me a message 👍🏼

Damn I thought the switch backs didn't work in these🤦🏽‍♂️ BTW that Z is bloody phenomenal!

So that's what they are! Thank you

More like £4800 without rubber😳 Trust me mate he forgot a lot more than headlights on this thing😂 but we're slowly getting there. Honestly can't wait to try them out properly. I've ordered some resistors to arrive tomorrow so hopefully get to see the indicators work🤞🏼 If anyone complains I'll just stick a BMW badge on, I'm sure they'll understand. Christ I've had better light come out my phone than the DE's😂😂

Over the moon with them😁 After seeing Davey's results I ordered some clear wrap the other day. You've actually just reminded me about it so thanks for that😂👍🏼

Bloody hell that actually looks unbelievable! Such a clean bay, might have to pop it on the Z now!😂

They work perfectly and what a difference!! The indicator bulbs need a resistor but that aside, they're fantastic! Oh, they had some kind of adapters on them. Can anyone identify what they are as they didn't fit my Z's plug (literally had a heart attack thinking they wouldn't fit😂) I have my old ones up for grabs if anyone's interested.

Not bad tbf

Came across this old, battered, blast from the past on ebay and had to take on the challenge to bring it back to life! Managed to get a BMC sticker but still can't find a CDA one😕 Nevertheless, after several ours with a toothpick and toothbrush it was ready for the K&N cleaning kit with a final polish to finish it off. Initially, I would have liked more time period correct mods on the Z. However, nostalgia aside, modern does mean better. Unfortunately, I don't feel the BMC intake would be better than my current setup. (Direnza intake pipe/heat shield with Greddy Cone filter) Back in the day if you had one of these on your saxo or 106 you were the pups nuts😂 Couldn't 'not' use this, so she's going on my other money pit, MK2 TT. Some before & afters👍🏼

Slowly bringing them to 2023 with some new LED indicator and side light bulbs. Cheap enough. Will hopefully not get the hyper flash but I won't hold my breath😂 They look great though! Removing the front bumper tomorrow to fit the new HR's. Can we all please join hands and pray they bloody work😂🙏🏼

According to RVL they only made 2 sets of these with the other set going on a wide bodied 911 over there in the states. Unfortunately, the owner made them into a bloody table (I have to settle with IKEA). So looks like the only set on a car in the world. I'm looking to have them rebuilt before summer to sell them ready for show season and I'd put them up at £3850. In there current miserable state, £2800. Just enough to get some RPF1's and some rubber hopefully🤞🏼

Honestly I think that's going to be the only option. I would der what it would cost for a refresh🤔

Looking for a close to pristine condition front bumper to replace my battered one bellow.

Thanks Davey, just purchased some on ebay after reading your post so thanks for that😊👍🏼

That's a great idea man. Is there a specific wrap you used? If so, do you have a link? **EDIT, sorry. Just seen the link above 😂

Very cool👍🏼

Just a post to see if my 3 Piece RVL wheels tickles any fellow Z owners pickle while seeking advice from anyone who tracks their Z. Came to a point now where flashy 3 piece wheels aren't my thing anymore. I'm literally scared to use them. Panicking if there's a bumpy road ahead, constantly scanning for potholes and forget about grabbing some McNuggets via a drive through! They're amazing to look at and the build quality is second to none. But unfortunately it just kills the vibe during an outing in the Z. They're 19×9.5 ET:12 in the front and 19×10.5 ET:12 in the rears. Will come with the centre lock conversion of course. Do you guys have any ideas/experiences with lightweight wheels? I'm looking at some RPF1's. Would be great if some of the track wizards could weigh in with advice and wheel/tyre specs 😁👍🏼 Also, if you guys want some super cool wheels for your show car, you know where to find me😊 Just purchased some brand new centre caps (still recovering from the import tax charge🤢)

Also, ordered some new led's to replace the old bulbs

Just an update: After drying the condensation, it left water marks inside the lens😭 So I was put in touch with a nice guy who regularly works on Z headlights to bring them back to life. Unfortunately they quoted £300 to open one headlight and clean the waters spots. As this is wayyy out my budget I tackled it myself. Literally had them split and cleaned in 30mins😁 Resealed with butyl and ceramic coated. Far from perfect! However, it's not a "show car" anymore so I'm more than happy! Let's hope they're plug and play with my 03 Z.

Thanks man👍🏼 I'll be looking for a set soon for sure