JayT

Final Update: Code was P0345 which was a cam shaft piston sensor in Bank 2 as mentioned before. I replaced with the Tarmac Sportz Hitachi OEM Replacement sensor £75 + delivery. Fitted myself, simple job would definitely suggest people trying it themselves. Took around 20 mins. Followed this vid: First proper drive today. Touch wood…. All seems okay so far. Hopefully this helps anyone else with the issue 👍🏼.

Update: Just had her plugged in and shows error code for Bank 2. She started ok this morning and only EML on. Codes have been cleared and seeing if it does it again then will replace both if same code. Will keep this feed updated as I find out more Jay

Thanks Alex! Don’t have the kit for that in the garage at home so will take it down to local Monday morning to find out the DTC’s. Will try disconnecting the battery now for a bit though. Cheers for the help mate, James

350 stalled today which I instantly assumed wasn’t a driver issue 🤣. It then stalled again on a normal flat pull off which wouldn’t happen. Didn’t start straight away and needed a pedal pump, still not starting well now at all. The EML, and traction lights are now on even after restart and letting cool off. Any ideas to what this is or what could have caused this? Garage isn’t open today weekend for diagnostics. Any help is appreciated.

So after reading some threads and also talking to people locally. I feel my rotor options are: Tarox F2000 or DBA T3 Pad option: Ferodo ds2500 Also open to any new recommendations of setups people are running. Hard Road use but also use for commuting once a week. Performance from setup needs to suit both scenarios. Please can I have some help with this. I currently Tarox G88 rotors and Tarox strada pads (not a great experience) Cheers Jay

This is generically what I took from this message just thought I would share it with the community and didn’t know where to post it so put it in here

Just going to drop this in here and hopefully people can reply and post their thoughts on this. I have added the link below and also a petition found. https://www.gov.uk/government/consultations/future-of-transport-regulatory-review-modernising-vehicle-standards/future-of-transport-regulatory-review-modernising-vehicle-standards#tackling-tampering https://petition.parliament.uk/petitions/600954

Welcome to the club dude. I’ve never actually seen one of these on the road! Looks so clean! 👍🏼

Welcome to the forum! Great looking Zed, same as @ShortPaul I haven’t seen those rims before but they look great 👍🏼

Welcome back. Brilliant 3 cars but wow that 240z is just 😍

I saw the pic on his profile, it isn’t on this thread 😂

Ah I’m based NW Manchester way, bit too far for me to take parts there 🤔. Thanks anyway 👍🏼. I missed out on some goodies here

Hi mate. What company did you use to get your carbon dipping done?

Welcome mate. Car looks insane, Love that old petrol station photo you got!

Hi Ryan, Thanks for the info, way more than I could’ve asked for 👍🏼. I will be doing some road driving so as you say a thermostatic would be more beneficial. I think I will be ordering myself one. Would you be able to drop a response after a could of drives to let me know how you get on? Hopefully may see you on track next year Thanks again, Jay.

Just a good deal I thought I’d let you all in on. I’ve seen a thread on here with a link at way above this price but I ordered the below motor off eBay and it works a treat (so far). My front washer motor decided to give up which is a common problem. https://www.ebay.co.uk/itm/FITS-NISSAN-WINDSCREEN-WASHER-PUMP-FRONT-/323266673442?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0 That’s the link incase it can help anybody, £8.45 delivered. Hope this save someone a few ££ which can go towards fuel . Jay

Just a good deal I thought I’d let you all in on. I’ve seen a thread on here with a link at way above this price but I ordered the below motor off eBay and it works a treat (so far). My front washer motor decided to give up which is a common problem. https://www.ebay.co.uk/itm/FITS-NISSAN-WINDSCREEN-WASHER-PUMP-FRONT-/323266673442?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0 That’s the link incase it can help anybody, £8.45 delivered. Hope this save someone a few ££ which can go towards fuel . Jay

Hello people, Is anybody running a Mishimoto Oil Cooler? I’m thinking of adding one to my car, I would like to try and get it round some tracks next year and wondering how much it could benefit. (My car is only driven weekends anyway). Also, have people fitted it themselves, I am no mechanic but love giving everything a go to learn before giving it somebody else. It does say difficulty 3/5 which doesn’t seem too bad. Would it be better to get a Thermostatic or non-thermostatic cooler? It will be used on the road too. Thanks in advance for any responders Jay

I’ve had my Zed nearly a year now and it has only had Shell V-Power, however it has done 90,000 miles and I cannot speak for previous owners. But I personally won’t run less than v-power.

Welcome to the UK and the forum. What made you move here from AUS?

Absolutely gutted for you pal. Fingers crossed for you. Keep this thread updated. Best of luck finding it

The switch operates the passenger perfectly and then up and down perfectly on the driver it just won’t operate the left to right on the driver. Strange one.

Happy to have you around the forum. I’m not the most knowledgeable guy, had a 350Z for just under a year now but always happy to try help. Can say I was waiting for one for a couple years and never had so much fun since purchasing. So many people builds on here to look at and aspire to. So many helpful people in this community to help you too. Good luck in your search

Hi All, So a problem decided to develop unfortunately out of the blue, and hopefully someone can give me some advice. My driver side mirror glass will adjust up and down Like normal but will NOT adjust left to right. My passenger works perfectly fine. I have a 2004 Nissan 350Z GT with the power folding mirrors. Any advice would be great Thanks Jay

Welcome to the family! Be patient to find the one you really want and you’ll love every minute!