Azurez33

Aslong as the offset is the same they will sit exactly the distance as the ones you have currently, obviously width is also a factor to take into account, but if it’s the same width and offset then no issues, this picture will explain a bit more, it’s mainly to do with the alloys mounting point as compared to outer side of the alloy

You pay now!

1. andy James Paid 2. Andrew_Muxlow Paid. 3.martin harry Paid 4. Callum Stocker Paid 5. SHEZZA Paid 6. Azurez33 paid

I’ll need to get the booking confirmation tomorrow for holiday and will get it paid tomorrow

For sale- 350z de plenum Bought this is off Chris at tarmac so I could still drive mine whilst the original was being powder coated, that being said it was only fitted for 3 days. No major issues apart from not being as pretty, all the pipes are good, there’s a scratch inside but is nothing to be concerned about. £45 + postage unless collection from Worcester I can arrange for this to be powder coated or even cerakoted if wanted- obviously will be more in price and will take a bit longer but would be happy to arrange this as my friend is a professional. I will need payment for the plenum up front and a part payment for the coating as once it’s been painted I can exactly sell it the same if it falls through. the website he orders his powders from do literally anything you can think of

Cheers mate, I’m getting on top of it almost there haha! Then I’ll update everything as it gets done I swear 😂 think it’s just the angle of the camera mate most of that is heats spots/soak aha I don’t give it much abuse so must be previous owner 😂 yes Exactly what I’ve been told too mate and so far so good haha, aside from the Zs clutch engagement point which I have adjusted! yes yes one moment- And also show me how paranoid you are I thought saying anything 😂

Haha thanks mate much appreciated thankyou, I’ve still got stuff to keep adding haha! oh god I have seen that they’re a little less ergonomic than some other designs haha! they’re a right bugger to get off so I’d be careful aha! I got it from nengun performance, there’s two sizes I believe, it’s genuinely a really nice feel (good it’s hard to not make this sound dodgy) 😂 Genuinely can’t fault them, the performance in the wet is as stated, they grip incredibly well and I don’t get any excess road noise or droning. I’ve probably done about 8000miles and they’re still on about 5mm so longevity is probably not the same as mps4s but I do rate them

Continuing on through the clutch and flywheel replacement. Removed the prop shaft- had a quick checkover of the ujs not that there’s much maintenance on them. Everything seemed all good though. disconnected everything on the loom and removed it out the way, removed the clutch slave and line- to replace later. Decided not to remove the cats as it could be done without taking too much out the way, couple of bolts for the bell housing removed and got the box out, always helpful having a transmission Jack but I have done one in the floor before and it wasn’t fun 😂 Thank god I had decided to do it when I did, as you can see part of the pressure plate retainer had broken off and the other side had cracked, once removed the friction plate still did have a bit of life left. The surface on the friction plate did look a bit nasty however quite a lot of hairline fractures, heat spots galore, and the flywheel was due for removal anyway as they have such a high failure rate so out with the old and in with the new!

Eye can see you

Good man! use the Audi to block the driveway off 😂 keep it safe

Ahh okay makes sense now I was going to say I walked through the carpark and didn’t see this 😂 that artificial grass looking green really helps 😂 the worst thing is I should have known as they currently have fake snow 😂

Welcome mate! Good to have another azure to the fold! looks clean aswell! Ask away there’s so much knowledge combined here and always really good traders

^^ Alex Definitely comes recommended from the 350 community

Getting some good numbers here let’s keep going 👍🏼

If you’re stuck on what to go with: have a look at here- https://www.tyrereviews.com/Article/2021-Tyre-Reviews-All-Season-Tyre-Test.htm This is how I up working out what I wanted/ needed vs what I could afford 😂 just make sure you get the tracking done properly!

That’s a bloody nice driveway god you guys must be in a nice area! cars look awesome, what’s the crack on the r35?

Thanks Andy! Will be Epic again hopefully!

Match all your tyres mate best thing to do and it’s good practice too

When we’re you there? I’ve literally just got back from longleat Center Parcs

I’m literally running similar sizes for alloys apart from 10.5s on the rear and I’m running the same widths just different profiles, just Defintely check your clearances

That ass is just beautiful

Shame it’s not Halloween 😂

Do love mk1 Nismo and lmgt4s they’re so nice

@andy james looks like we’re good mate? Maybe a few more

Jr 32s same staggered width as yourself fronts are et22 rears are et18