Osakakev

Yes, thank you both for your replies

I will have a look, I was just after some pointers to where the likely places are that it could have been turned off/disconnected. Cheers

Thank you but I don't want the ability to switch it off and on like the video I just want it on permanently. I am not sure how the abs/TC were turned off in the first place. I've been driving it for 7 months without but I'll end up needing one day haha Cheers

Thank you, will mention that to mechanic but definitely no extra button anywhere

Hi, The ABS and Traction control are disabled on my 350z. I was unaware of this when purchasing...... The lights have been blanked out on the dash and handbrake light won't go off. It was discovered by my auto electrician when trying to resolve this (handbrake light is now blanked out as temporary measure). I suspect it's for track/drifting purposes and not to hide a fault going by other mods the car has. How do I turn them both back on? Its going in for service soon and then to auto electricians to fit a new stereo so ideally want to get them to do it at the same time. They don't have much knowledge of 350's so if anyone can provide any advice/pointers to pass on it would be appreciated. The fuse is in place and seems normal. Cheers

Yeah that was the main reason I went for a fresh import. It was getting rust proofed in the pictures so hopefully stays that way for a long time!

Thank you, didn't realise it was in a casing! Will see if I can get someone to look at it, hopefully it's a straight swop to a standard diff. Yeah think the diff cooler is quite expensive so will likely take that off when switching the diff.

Hi I imported a 350z last year and apparently it has a 3 way hydraulic diff... My mechanic thinks it's for drifting but didn't know anymore than that. I want to change the oil but no idea what I should use. It's also my daily so not sure it's a good thing to have or if I should swop it out for a standard one. It locks at low speeds (assume that's what it's supposed to do) and clunks when turning at slow speed. I've attached some pictures, is it possible to identify it from them? Thank you in advance Kev

Thanks Ekona & Bobby. I probably have 2/3 inches head space and the roll bar is padded where I could hit it! Will have a look at specialists in the North West who might be able to fit them for me

I never thought of the roll cage being dangerous so harness seems the way to go as not wearing a helmet going to work lol. Was thinking of Takata ones (only because I know they are not cheap). Would I need a harness bar? I hope they are genuine, has all the bride rails etc! I bought the car from Japan at auction and was listed as having bride seats and also has some expensive mods so can't imagine anything is fake Cheers

Thanks Ekona. I should have said I only use the car for normal road use and it will never be tracked. Just concerned I could hit my steering wheel and if I can make it safer for my passenger then it's worth doing. I would get someone professional to fit it. I am not sure where my head sits to be honest but will check (I'm 5.10 ish). Cheers

Hi, After a bit of advice if fitting a harness would be safer than seat belts for driver and passenger. My car has roll cage, bride seats and a non air bag steering wheel. I don't want to fit just for style. Also I assume I would need a harness bar? Cheers

Hi, Tried to get a reverse camera installed using my existing sat nav screen but auto electrician says he can't find any input... The manual does seem to indicate it was an option! Has anyone else had it done? Just want to check before I change my stereo to one with a screen Cheers

Thanks Alex, very helpful as always!

Hi, I'm trying (and failing) to remove my HKB hub to install a quick release. I've got as far as the picture below but not sure what to do next. The hub seems solid, my only thought is to force it off the stopper at the top and it spins off? Thank you in advance! Cheers

Hi, I have an 06 with the standard factory sat nav which I know is useless but I can use it for both front and reverse cameras? I don't mind both being on the screen at the same time but not sure if that's possible. Cheers

Cheers. I contacted them on live chat and they wouldn't commit to any timescales whatsoever... Hopefully it won't take months!!

Hi, Has anyone registered an import recently? Form isn't the easiest and it's going to take ages for the DVLA to issue me a V5 so don't want it to be rejected and take longer. If someone could let me see a copy of their form it would be really appreciated! Cheers Kev

Thank you for the replies, it's much appreciated. I'm sure it has a thermostatic sandwich plate but I'll double check

Hi, My JDM Import has a Greddy Oil cooler fitted. When doing an oil change should I add extra oil to take it into account? I think the capacity of the cooler is just over half a litre Cheers

Thanks Alex will do

Thanks Alex It's just he thinks the parts look different to the one's he researched so not sure if they are JDM ones. Great, what is the cost on both of those? Can I just put a Nissan oil pressure gauge in alongside the other aftermarket ones which seem to be working?

Hi, My 06 JDM 350 is showing low/nil oil pressure on warm idle. Mechanic has checked with his mechanical gauge and thankfully pressure is ok so must be a false reading. It's full of oil and new filter. Its got lots of mods including a trust oil cooler so mechanic isn't sure which bit to replace so he took some photos which are below. The gauges appear to be aftermarket and the oil pressure is in bar.. Any ideas what I should try first? Thank you in advance Kev

Sorry, how can I/mechanic tell if it's a vlsd or just an LSD? It's an St model with brembos Cheers

Thank you! I'll get a mechanic to confirm before I change it Cheers