scotzman

Hi Jon, just looked at what you had and couodnt see an ashtray, the m6 bolts are tapered like below

Lights now removed and stock back on.... sigh.....

Never noticed that switch below and im not even gonna ask about that " Guffin sprocket modulator." switch does look like a errrr oh never mind.

Cheers Rob, works out about £60 delivered

Hi All, looking for a Center console ashtray and 2 x Airbag Bolts. Thank you

Anyone tell me what the button on the right is ? Thanks

Cheers, hes gonna call back

Thanks for the update Cob..

Thanks Jon, received and quick postage again.... thanks again

3 points should be given for these 3 outof 3 points... thanks

Thanks. Pm sent. 2nd Dibs Please

Thats the one.... thanks

Thats the one, why didnt i find that.....bought parts from you lately, gentleman and fast delivery.

Or test drive when done, then do a runner.

Tried burgh locksmith in Edinburgh to cut me another key, guy never got back to me, could do the fobs myself just wondered if it can be done with the valet key or it needs the 2 button key.

Hi All, Anyone know if its possible to code the fobs with the valet key as i dont have the original 2 button key cut as yet. Thank you for any advice

Thanks Miller, Ive fitted the front and it goes in on the 9th jan, looks a pretty good line up and that was a quick fitting and only stuck on with the top of the bumper clips so ill fine tune it so to speak before then, the rear bumper is a chargespeed so im guessing that might be a little more difficult to do myself as i dont know about brackets etc so a little reluctant to mess with that.

Thanks Miller, sort of puts in in perspective...

Hi, it was just a question on peoples thoughts, due my quotable inexperience, i was just asking if the prices were reasonable and i know the prices could be adjusted either way.

Hi all, have new and front bumper i want painted and fitted and received the quote below... any opinions on if thats expensive/reasonable/cheap ? We charge £35 + VAT per hour so you're looking 3-4 hours per bumper I would guess, but again it depends on the bumpers. To paint the panel is £250 + VAT per panel as they are new parts. When you come in Monday ask for a 10% discount and we will honour that in the estimate straight away. Thanks for any advice

Hi All, im looking for a front bumper stiffner (passenger side) as in the pic Thanks

Hi All, Anyone know if there is a knack to securing the bottom rubber mounts on the frame for the 2 pins on the radiator to slot into, there is a hole either side but the rubber mounts seem to be too big to fit, tried to put them in from the top and bottom of the lower frame, the rubbers seems hard, would that be the case. Any help would be much appreciated

Hi Olly.... I didnt take my intake off that far back also i didnt discconnect the maf harness so im wondering if the radiator harness at the bottom with the 2 fan plugs and the 2 harness plugs can go on either way or so ill swap them round and if no joy ill do a ECU reset... Update: one of the pin holders on passenger side light ballast wasnt making a connection so seems to have fixed the EML. Thanks all for your time and input.

Scared to go and check olly in case i owe u a fiver, ill go down to the car shortly and check the wires, what was your fix assuming its that.

U could be right olly, as i only removed the 2 bottom plugs on the radiator and from the maf connection to the filter to get more room, but didnt disconnect the maf itself only the hose clip