scotzman

Anyway the rubber is obviously used for something, and obviously you guys dont know what its for

Was just thinking that myself, luckily i moved her thong out the way.....

And what if you turn it inside out when finished

Now your choosing not to see the whole picture Olly, your only choosing what appeals to you in that pic, the object is in the center of that pic

No No you have it wrong and jumping to conclusions..... F***y = Finny: Definition: "A Girl. Very Outgoing, Hot, Amazing, Smart, Very trustworth"

you would if there was a F***y in it

Errr its a packet of crisps

Hi All, Anyone tell what this rubber part is that i found under my seat,, Thanks

No sad faces

Thanks for everything chris, i discarded all the wiring as the colours were conflicting with my wiring...used the connectors and found that if you pull out the inner sleeve on the connector just a tad then you can put the pins in and they secure... when all done pushed the sleeve back in then clicked and all now ok... Got it all working, put back the trim, admired my work then found the sat nav gps receiver sitting at the side of me.... but that ok cos im gonna wire in the DVR and rear reverse camera... Thanks again for all your help and you Blackpudding and Haggis is still here...

Make me an offer £1 and you provide shipping. I will make sure these lights never come back to haunt you or anyone else. Using them for floor lights now Really ? Can I see a pic Sorry that would breach my copyright, Patenting, Royalty Management, Licensing, Prototyping

Now if you were talking about a lady that was "Simple,clean and flashy " then i woud read your reply twice

I agree with u all..ots also down to personal taste. I'm sort of old fashioned and a traditionalist... but the smoked ones do give a 2 out of 10

As long as u let me pay the postage

PH....They really suit you car, i got the smoked ones, have you had any issues being stopped by the police ?

Make me an offer £1 and you provide shipping. I will make sure these lights never come back to haunt you or anyone else. Using them for floor lights now

, Received today thanks, also received my Harness adapter for the head unit im putting in, ill pop down the car shortly and count the wires in the car, if there is more or less then ill discconect the pins on the plugs as the Harness adapter i bought was meant to just plug into the adapters then into my HU which allowed me still use the Bose system, would have been a 2 min job... I now have 2 options, the first would be the easiest and thats to put the pins back in ( I checked when removed some tape to see if the wires had been cut but the pins are all still attached) into the original order on the plug, then plug into my harness adapter, but what pins go where on the original plug and surely it depends on the original Clarion unit... ill have a look at the wiring and see if the wiring on the plugs sort of match the colour of wiring on the car.... ill post the updates shortly... PS: Keyser your def dodging this haggis and black pudding as no address on the package

Excellent link... wtf now

No probs at all, happy to help As I say though, I'm no expert so just bear that in mind! Haha, sorry I'm a bit picky aren't I? Not at all Hodaka, i appreciate any help.

Hi Sargara, they are pre-facelift lights according to the site... all u do is put the number 112280174311 in ebay search bar and it will show you the headlights, i was assured by the seller all i have to do is adjust the throw of them.. I will do as you suggested tonight with the lights. Thanks for your time

AMAZING IM SURE HE'LL BE ABLE TO HEAR YOU ON THE FORUM ABOVE ALL THE SHOUTING THAT IS HAPPENING IN THIS VERY LOUD ENVIRONMENT and breath. Jheez I've seen some wiring fails but that wins hands down. Make sure you cover each join, thats a short circuit waiting to happen Hi Olly.... checked all the tape, and secured properly various cables... nightmare mate... although there looks more connections than on the harness above... ill count them tomorrow..... Just renewed the clutch, bought the wrong headlamps speedo not workin.. fans not working ect etc it goes on and on trying not to be too down though

Hmmm... I'm afraid I can't really tell toooooo much from those, but it looks like you have an insanely intense hot spot. I say this not only because of the output on the wall, but also the light output on the ground. You can clearly see 2 beams, and they're both quite narrow. If that is the case, there isn't much that can be done. It's not due to bulb alignment, but more of the design of the headlight. It actually almost resembles the bad light beam that I showed you in my pic above (bottom of the 2), but slightly better as it doesn't have the circular dark patch. Also it looks like the passenger side one is aimed very far right. I'd aim that further left if I were you. Please take all of the above with a pinch of salt. I've been getting into headlights / projectors (weird hobby I know!), but I'm far from an expert! In terms of pic, a little further back and against a flat wall would be ideal. Kind of like this but without bricks (if possible): Ill get another couple of pics tomorrow, also there is a further cog below the height adjuster...Thank you for taking time to reply

I have Respect for everyone and everything... my comment was tongue in cheek... why are your giving me a hard time, maybe my knowledge is lacking but i was only asking for advice/comments...

Ekona's right though. If your headlights are for LHD the beam pattern will be wrong, which would be a cause for failure. If you look at my pic above, the left hand side of the beam is higher than the right. If your headlight is for LHD, it'll be the exact opposite. Poop picture as I couldn't be bothered to upload my own, but here's a pic from the MOT guidelines: Or if you want to take a proper look it's in section 1.8 of this PDF. Sounds good As Requested... Regards

Thank you so much Keyser... PMin you now