MLCMK

https://vimeo.com/168486773 Didn't realise the 370Z's in Driveclub were free to unlock Looks like I need to stick with my 350z until I can drive a bit better! 😂 Sent from my iPad using Tapatalk

You put it in the title though! ..."Off topic" so I moved it to that section. Thank you, was using the iPad and couldn't see it in the list :-) Sent from my iPad using Tapatalk

Hi all Didn't know where to post this but I realised about a week ago that there is a way of getting your old PS3 G27 wheel and pedals (+ shifter) to work with a new PS4 All instructions for the GIMX adaptor you need to build are on the site below, I ordered the parts a week ago and built the adaptor this morning, works a treat! http://gimx.fr/wiki/index.php?title=Main_Page For the cost of the parts (£30) and a little time (I'm no expert with a soldering iron by any means!) it's a lot cheaper than buying a new G29 wheel and the money saved can be diverted to buying more bits for the Z 😀 Project Cars and Driveclub tested already and it's nice to have the wheel working again. Hopefully the weather holds out for the bank holiday weekend and I spend more time outside driving for real than on the big screen! Enjoy the bank holiday weekend all MLCMK

I'm looking forward to hearing this Kbad 😀. Glad you are chuffed with it. I've had a weekend without doing anything to my Z apart from cleaning the pedals! Sent from my iPad using Tapatalk

Anyone on here? reg ended in JXB Sent from my iPad using Tapatalk

Welcome along, nice looking Z Sent from my iPad using Tapatalk

As it's a sunny day and a lot of us are from around Milton Keynes I thought I'd let you know that B&Q in Milton Keynes near the train station are selling 5 litres of CarPlan Ultra Wash & Wax for £4. Now I'm no expert (have washed the company car with washing up liquid for years ;-) ) but I washed my car with it today and I'm very impressed with the result. Have a great weekend all Jason Sent from my iPad using Tapatalk

Hi Karlh, I just double checked and these readings are from the sensors before the cat (I looked at the PIDs) After reading your reply I obtained a scan tool and checked my 2005 Z. I got the same readings that you did; approximately 0.3 V for bank 1 and 0.6 V for bank 2. It appears that Nissan is using PID $1B to report these values. PID $1B is designed for older, narrow-band O2 sensors, and reports voltages between 0 V and 1.275 V. The pre-cat sensors in our cars are wide-band, and output approximately 1.5 V at lambda = 1. If our readings are the true values then both banks, and especially bank 1, are running very rich. I suspect Nissan has scaled the wide-band readings to fit within the narrow-band range and that 0.3 V and 0.6 V represent lambda = 1 for banks 1 and 2 respectively. Unfortunately, I cannot find anything in the Service Manual to confirm this. Thanks for confirming you see the same readings as I do, I'm keeping an eye on mine now on a regular basis . Something I found about mine recently is that it is a decat (didn't think to check that when I bought the car!), just thought the sound was normal for a cobra system. You live and learn. I think you are right with the Nissan scaling, it's too much of a coincidence that both cars have identical readings. Cheers Jason

Great photos Matt! Sent from my iPad using Tapatalk

Great to meet you all, good to see so many Z's all in one place but it's going to wipe out my bank account as I now have a much larger list of mods to buy :-) Sent from my iPhone using Tapatalk

Meeting location for tonight if the weather is good (not raining) Primark car park by the MK Dons stadium. Unit A8 MK1 Shopping Park Stadium Way, Milton Keynes, MK1 1ST (Green dot shows location) Back up Meeting location for tonight if it's raining Sainsburys underground car park, enter the car park and go down one level Sainsbury's Milton Keynes 799 Witan Gate Milton Keynes MK9 2FW (Green dot shows the entrance to the car park) See you all this evening Jason Sent from my iPad using Tapatalk

Hello and welcome Sent from my iPad using Tapatalk

Welcome to the forum Sent from my iPad using Tapatalk

Thanks Sam I'll build a dashboard to check the fuel trims and add it into dash command Cheers Jason

Excellent, thanks for your help Tricky-Ricky. I will keep a eye on it

Welcome Jim Sent from my iPad using Tapatalk

Thanks Tricky-Ricky, below is a snapshot from a bit later in the run, decreased revs and speed. There is some fluctuation on both sensors but the blue bank 1 sensor always reads lower than the yellow bank 2 Voltage Voltage switching is clearer to see in the below

Hi Karlh, I just double checked and these readings are from the sensors before the cat (I looked at the PIDs)

Hi all I have a question on how close the voltage values for Bank 1 position 1 and Bank 2 position 1 should be when the car is warmed up and running. I had the cruse control set for 60 mph and took the snapshot below of the readings and noticed the Bank 1 voltage was significantly lower than the Bank 2 number From what I understand the low voltage will make the ecu think that bank 1 is running lean and make it over compensate with extra fuel Am I on the right track or miles off? Sent from my iPad using Tapatalk

Having issues adding my name to the list from the iPad but count me in Sent from my iPad using Tapatalk