jimmy.farrow7

What do you use to polish your exhaust Tim. I need to get some axle stands to clean my arches. Im going to take off my undertray this week also if i get the time and fit my one I got from atorqen. I have loads of car parts but I want to fit them myself rather than a garage.

Ive got my black door mirrors and black handles to fit, and painting my engine bay plastics mate. I had some paint mixed in A17 paint good rather than just orange paint.

I was hoping for another 5/6 hours of modding today but weather has been rubbish.

Cheers mate hopefully will help someone

I recently brought a JWT pop charger from Tarmac sports so I thought I would do a step by step with pictures. Tools I used- Small drill Small drill bit Flat head screwdriver Phillips screwdriver 10mm socket Adjustable spanner First of all I disconnected the negative on my battery before starting. 1)Remove your airfilter from airbox. 2)Disconnect the clip that is connecting the MAF wire onto the top of your airbox (mine snapped be careful). 3)Disconnect MAF wire and tuck out of the way. I pressed down on the MAF wire clip with a small amount of pressure & got my small flat head and used it as leverage between air intake and the bottom of the clip as it was very tight. Be careful as MAF wires are very delicate. 4) Remove the bolt that is holding the air box in place, it is just underneath the strut brace. 5)Now undo the bolt/clip that is holding the MAF tube in place, only loosen until the clip moves freely. 6)Remove clip from air vent. 7)Now the whole air box should be free. Pull up gently and check if no wires or trim are caught. If not pull firmly up and towards you and it will slide right up. 8)Now remove the MAF housing tube from old air box and transfer to the JWT filter. 9)Attach rubber trim to the heat shield 10)Now line up your heat shield in correct place, make sure the air vent (step 6) is pushed in, it should now overlap the screw holes on the heat shield. I just used a small screw to mark the vent where to drill both holes. Now remove vent, drill 2 pilot holes and place back in position. 11) Now attach bracket to underside of heat shield against metal frame underneath with 2 bolts. There is not much room to work to secure the bracket so i used a 10mm socket extension + adjustable spanner to tighten. 12) Attach new filter, re-connect MAF sensor and retighten clip and bolt to intake tube 13)Attach bracket with bolt(same hole as step 4) and clip onto MAF wire. 14) All finished, time to re-connect battery. Hope this helps guys

SOLD MODS PLease Lock

SOLD MODS PLease Lock

Looks good mate

Im looking for the long strip of rubber/plastic that clips onto the underside of the front bumper as mine is in rubbish condition and i would like to replace it

I think it should be a direct replacement mate as i have the one that goes up and have just brought the retracting door cubby. If no one gives you a 100% answer i will test fit my new one in the morning and let you know.

Cheers for all the help lads

Yeah there are two different sizes so i will have a better look tomorrow and give you an update

And just screwed straight through the grill into the plastic i take it

So the original grill stays in place then and this goes over the top. Ill have a check tomorrow

Yes mate thats all, i imagine they go through the back but where too

I brought a new Zunsport Grill from a member but it didnt come with any instructions. Could anyone tell me how to correctly fit or how you have fitted yours.

You will need to list it as a mod though right?

I have sent you a PM Mate

I like the settanta gear knob and the drift hand brake very nice.

I believe Rich370z has one on offer

They are lovely looking wheels

Does anyone have a quide to fitting mishimoto coolant hoses to a DE, i want to know anything i need to watch out for

Thats a shame!!! I will try elsewhere.

Price drop £130 posted

I will probably just wait for your slam panel to come on sale as all your other parts are spot on and a great price. Ill end up getting the engine harness and slam panel together as i imagine they will be available around the same time.