Jonnymonno

Scholar Green Stoke on Trent, not sure about the headrests, measure the hole centres and I will check It's a good possibility they will fit

Here's where I fitted mine Just an idea, not easy and junked all the air intake bits but looks like it belongs there Sent from my iPad using Tapatalk

After replacing my standard 370 seats I can't see the point of keeping them so I might as well put them up for sale. They are in top condition as the car has only covered 28,000m from new. With a little work I am told they will fit the 350 for anyone looking to upgrade their worn out seats I'm looking for £300 for the pair and could possibly deliver if not too far away Everything works and heated too Pm me for more details if interested Thanks Sent from my iPad using Tapatalk

Excellent pictures. Nice one

Sounds well with the Berks on Dave

Hello and welcome

I've lined my spare wheel enclosure and surrounding areas with carpet underlay and run on MPSS I find it much better

Bought it for the Mrs really (honest) but it's such a contrast to the Zed I knew the coupe was coming but we wanted a soft top Sent from my iPad using Tapatalk

Love mine Sent from my iPad using Tapatalk

Yes pictures please and welcome to the forum

Nice looking spoiler really suits the car

Love this thread, it's my bedtime reading When do you hope to have the beast on the road?

Hello and welcome

No problem mate, can't believe how much lighter they are too than the originals

Thanks Sipar, but I do like my knob to stand out

I will be posting my original seats up for sale soon if anyone is interested which are in top condition with no wear on the bolsters Sent from my iPad using Tapatalk

Next I had to tackle the electrics, so I disconnected the battery and removed all the plugs. The seats came with side airbags coming from the Nismo Duke,and on further inspection someone previous had cut the plugs off but luckily the wire colours matched up to my Zed so I took the airbag plugs off my seat and wired them in. The seatbelt wires and fixings unbolted from my seats and went straight on to the Bride seat frames so plugs matched as before The seat pad sensors had been cut so had to remake the ends with connectors I reconnected the battery and waited.....all good, everything works No fault lights and the seatbelt sensors work!! Result I fitted the seats to the frames and here they are They are full Recaro's not the part Recaro part Zed bases fitted to the new 370 Nismo's What do you think, blood sweat and beers but I think we'll worth it Sent from my iPad using Tapatalk

So on with the next mod ....seats, which I ever thought I would find anything I liked until I was shown these which I snapped up straight away Thanks Adrian ;D I've been looking at them gathering dust in my garage and thought I'd better make a start. I priced up the 370z seat rails ... Ha ha ha... Are you kidding on the price? They came with Bride Seat rails which I decided to alter so stripped them off the seats for a better look and this is how they looked Not far off at the front but angles all to **** Miles off at the back Lots of measuring and levelling I made these brackets which would bolt not weld to the seat frames I made them to look as similar as possible to the bride mounts 4mm thick with the slotted bolt holes Sent from my iPad using Tapatalk

Hello and welcome to the forum

Hello Nick and welcome to the forum I'm from Stoke so not far away

And see you tomorrow

Cheers teejay. I must try and make the next local Sunday meet still owe John a breakfast. Haha I'll hold you to that

See you there

Already done

Sorry for the late addition, hope it's ok as I'm not working Sunday now