davey_83

Ello n welkom I wanted a black 350z, stick around

Cheers - The kit options look amazing, very versatile for a customer - really nice work.

I'd be inclined to try and repair these yourself. The wheels aren't damaged or kerbed, only the clear coat giving up. I'd have a go at 1500, 2000 wet sand and then 2k clear lacquer the lips. Should be straight forward to do and if you mess it up, the refurb won't cost you any more and your only £20 and a few hours put of pocket.

That fitment looks so neat with good clearance, great that I pairs with the existing y - pipe back. What's now in place to relieve crankcase pressure or is this not an issue due to a low boost setup?

👆 few post up fella

Literally perfect conditions for a drive out. Nice to be able to float about the Cotswolds in fine weather with it being nice and quiet. Reset wash and dry the next day of course

Out for a spin yesterday through the Cotswolds with the usual suspects, a Zed convoy in the sun = bliss

Should be fine with that oil I'd have said https://www.z1motorsports.com/lubricating-system/nissan/nissan-ester-engine-oil-5w30-p-3679.html

I think they'll look a breath of fresh air on the road. Briefly followed an A110 on the road the other week and it stood out for all the right reasons, as I feel this will.

I tagged on a Turtle Wax cheery snow foam allowing for free delivery

Can't remember the last time I took the Z out at night, makes for a moody picture.

For the £££ it's the best £5.34 https://www.carparts4less.co.uk/p/turtlewax-sealant-wax-500ml-552777331?gclid=EAIaIQobChMIk9KyrbHg7wIVs2DmCh25eg3WEAQYAiABEgK1-fD_BwE

P3 service due less spark plugs and air filter. Looking to complete over the weekend, time permitting. Came across a seller of these larger oil filters, so will be sticking with this one - more filter area, more filtration. Miller's Trident 5w30 Nissan oil filter Titan Race Gear Titan Race Synchro Autochem coolant Molyslip gearbox Mileage: 88356 Got to keep the ol' girl running sweet 👌 Bye bye America, hello Japan

1) Payco - Datsun 510 SSS. Reg WWU 276J 2) KBAD - 350z . Reg J44SUS 3) nismoandy- 350z - WP06FNX 4) Nino - 370z - Reg. SK12 XZZ 5) Olly350z - 370z Nismo - GM16 JBX 6) Andy_Muxlow - 350Z - Reg. A20MUX 7) andy james. 350z reg AJ07 ZZZ 😎 Humpy - 370z N12 SRA 9) Richn370 - 370Z CX59OKP 10) ColDel - vx220 - VK05XEU 11) davey83 - 350z - GT05ZED 12) pintopete58 350z GA53SOZ 13) Charlie Boy - 350z - AK56BYT

1) Payco - Datsun 510 SSS. Reg WWU 276J 2) KBAD - 350z . Reg J44SUS 3) nismoandy- 350z - WP06FNX 4) Nino - 370z - Reg. SK12 XZZ 5) Olly350z - 370z Nismo - GM16 JBX 6) Andy_Muxlow - 350Z - Reg. A20MUX 7) andy james. 350z reg AJ07 ZZZ 😎 Humpy - 370z N12 SRA 9) Richn370 - 370Z CX59OKP 10) ColDel - vx220 - VK05XEU 11) davey83 - 350z - GT05ZED

Interesting test if you've not seen it and worth a watch as it's about that time of year 😀

Nice move on the HFC, new y pipe needed

Not a suggestion with regards to the exhaust, that's easy swap it out for the best you can afford Another engine mod I can recommend is a well made lightweight crank pulley

Ello n welkom

Y pipe is sold

Been a long time coming but finally went for an open water splash. Super cold but makes you feel alive!!! Can't wait to for the next dip.

Always wanted a teggy

Always felt 306 GTi-6 looked fab

For a moment then I thought this meant coilovers in the tyre section

Ahhh detailing indoors, must be bliss 🤲