ZeppoJeff

Have you set the plate behind the boss straight? If not then the steering angle sensor won't be where it's supposed to be and lights come on.

Speak to davectr as I think he got his done there

Bump

I'd be using a strip of led rather than a ring as the light output will be greater unless your looking for the Angel eye look.

I think for a uniformed light all through the projector it would be better with led strips and easier for mounting also. Also if u go for led strip you could change the little colour if that's something ur into. Have it a white light for driving then any other when off road obviously ;P Personal opinion though. Good luck with what you decide.

Mine has the iron man mod done to mine before I got them but I've an idea. Basically you are going to have to take the lights off ur car, bake them, split them, dismantle the internals, install a strip of less around the projectors then reassemble. Obviously not going to be simple but that gives you an idea. It's up to you how u wire them up though as you might want to run its own live off something or tap into the sidelights. Hope that helps you.

Looking for the upper Windows seal at the drivers side as mine has torn and no not really sealing anymore.

Looks like the same guy is trying to sell it on Facebook also and looking for £750ono

[quote name='Mj86' timestamp='1455738185' post='1587701']Headlight is £1000????[/quote] Hr headlights are pretty sought after and they have been modified so it wouldn't be to far off. I'd maybe say maybe nearer £900 though

Yeah I got a little bit of pops and bangs mapped in. Basically I believe when throttle is let off if dumps and small amount of fuel to get some pops and bangs. Also dumps I bit of fuel when hitting limit also to protect the engine from starving of fuel or some jargon. None the less it sounds nice

Screw off the knurled part and the threaded part should follow

I've got the invidia and I've heard the ark. I'd say the invidia is louder for sure but ark has a nice burble. If ur looking to get an overrun map on ur zed on stock cats they ain't going to last long I'd say. Hears two videos of my zed. First one was just after installing with testpipes and the second was 6 months once they had settled in https://vimeo.com/155652608 https://vimeo.com/155652715

Damn why didn't I notice this

Welcome along buddy

New wheel installed today And yesterday I got the retrimmed headliner installed

Is there any machinists on the forum? I'm needing a simple 10mm spacer made to correct the position of my steering wheel as its got a silly offset. Looking for something like this made.

And now we have the finished result after installing the head liner

Any pictures?

It was not advertised I don't think. Think his friend over in Japan sourced one for him.

Yeah it's G's one

Just had my sunvisors finished and they look bang on even if I do say so myself. Just need to give the plastics a second coat and everything back together

I've purchased from them and they are very helpful and speedy.

I'm going to installing my new wheel next week and what I understand is that the bolt pattern is out by 60 degrees from normal wheels. So the question is that I'm going to have to offset the hub to make the steering wheel straight...is this going to cause problems with traction control etc? I can buy a 10mm spacer to correct the 60degree different but rather not

Quick question you may know...I need to install my steering boss 60degrees out so my steering wheel is straight so is this going to effect my traction control? Will I need to purchase a spacer to correct the 60degrees?

PM coming your way with some info for you. Look forward to it