fairladyz2013

Hi all, Anyone got any clips of what a scorpion exhaust sounds like on a imported zed with no other mods? Thanks

Hi all, Was wondering how much does others approximately pay for their insurance on their zeds? I'm paying 1.4k/ 10months (admiral), 23, no n/c, 2 years driving exp.

Jdm's seem a lot quieter (exhaust) than Uk spec'd ones I have noticed ...

I read it on the scorpion main website. But I presume it does/can fit on imports as others say?

Thanks for the replies.. Great now I know these can be fitted, which will be on my to buy list. Is the exhaust system (such as the scorpion one for £374) the only thing required or are other parts needed to fit? Thanks

Hi, Has anyone fitted an aftermarket exhaust on their zeds (imports) .. I've read somewhere that imports can't have after market exhausts, true or? Cheers for any replies.

Thanks for the replies ... Is it safe to drive still as they say or will it cause long term damage or a potential hazard driving it for now? Cheers for all other replies again ðŸ˜

Hi ppl, Advice needed, thank u kindly in advance ! 👠I had a service done on my car yesterday and they changed the spark plugs too. Was told that the plugs had oil on them and that possibly need to replace the rocker cover gasket? Was also told that this isn't a major problem as the engine will burn off the oil and to just keep my oil levels checked weekly. Anyone know if this is correct ? or had similar problems before? Thanks to all that reply! ðŸ‘ðŸ˜ðŸ‘

Will get them to put the right 225/50's on tonight . Anyone know the OEM load rating and speed rating for import zeds so the tyre place don't give me some silly ones ?

Anyone here puts molyslip into their gear box, Any difference noticed?

Thanks for the replies.. Yea will be heading back there after work tonight to get them to put the 235's on the rear. 😄

Hi, so today I took my car to get the tyres replaced and noticed when I got back that the front are 235/45/17 and back are 225/50/17 .. Is this suitable for the zeds? Thanks in advance for any replies

Yea that's why I thought I'll get some form of petrol cleaner to prevent any build up 😄

Hey ppl! Wondering if anyone uses fuel system cleaners / addictives such as Redex? Any difference made ? Thanks

No. As far as the garage is concerned they usually want to get it in / out as quickly as possible. Servicing is usually given to the YTS trainee lad who has something like 20 minutes allocated to do a full service. Sometimes if the garage is looking to get more cash out of you, they may check the tyres & brakes and recommend that you need new discs etc... in such cases it pays to check yourself as more often than not they are just trying it on. Ah thanks for the reply mate. Yea I guess your right. Do you recommend anything which can test the cars engine is in good health? - reason being I had a rx8 and the engine went and wanted to make sure my new zed is completely fine before adding extras.

My service book just says oil/air and stamps .. Thanks for the web link!

Hi all, Wanted to take my zed for a service to make sure all is well before doing any work on it. Anyone know what's included in p1,2 and 3 service ? Just Oil/air/plugs or more to it? Thanks ppl

Haha. The Incredible Hulk sounds like a plan 😄 has anybody broke the 22 mm bolt before in the process ? Lool.

I used a 36" breaker bar, was a piece of strawberry cheesecake using it Haha. I could do with some cheese cake. Still having no luck at the moment. My breaker bar is too long to fit in. It's not budging left or right 😅

Haha thanks for all the replies.. I will do trash the extra stud 😄 ... Anyone got any good advice on how to get those 22mm caliper mounting bolts off ? .. They're a b**tch. Lol. Already tries wd40 and having no luck right now :/

Thanks for the advice ppl was worried whether they'll be safe to fit without that extra stud holding them on?

Hi Just received some brake discs for my zed today and upon looking at it, it doesn't have that hole for the stud/bolt to go on and mount the disc . Is this normal or non compatible ? - Image 1 is the one I have bought (5 holes) -image to is the one that's meant to be on car (5 holes + 1) Thanks for any advice in advance .

Hopefully this works now http://www.eurocarparts.com/mobile/ecp/c/Nissan_350Z_3.5_2004/p/car-parts/car-transmission/clutch-and-associated-parts/clutch-kit/?641701280&1&acafad45075ad396d9b7a4c8b11488dd6a09a12d&000069 http://www.eurocarparts.com/mobile/ecp/c/Nissan_350Z_3.5_2004/p/car-parts/car-transmission/clutch-and-associated-parts/flywheel/?336700030&1&9c46f0771038a7c11d3b6ec9adbd0c48c25cdb9f&000134

Hi all! Im in need to replace my clutch and possibly flywheel. Wondering if anyone has any good recommendations? ...i saw the ones below from eu car parts, but wasn't sure if they'll fit the import 350z's? http://www.eurocarparts.com/mobile/clutch-kit http://www.eurocarparts.com/mobile/flywheel Thanks ppl!

Hi , I managed to brake my front brake caliper bolts and are stuck inside the housing (pics below). So was wondering if anyone sold these replacement parts ? Thanks