Hooch

Thought this was a bargain to anyone that needs a new injector or more. Less than £10 each http://www.ebay.co.uk/itm/Nissan-350Z-OEM-Fuel-Injectors-/321443679263?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ad7894c1f I did used to own a Fiat Brava which blew injectors regularly, not sure how common it is for injector failure on the Zed and if this is a pointless post...

Was looking at getting that oil catch can myself http://www.ebay.co.uk/itm/small-oil-catch-tank-can-Nissan-Skyline-200sx-Silvia-R32-R33-R34-350z-370z-/151332294888?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item233c1b90e8 Is there any real benefit on a n/a 350z?

I'm pretty sure if you don't have headlight washers/switch then it doesn't count on the MOT

A lot of the time you can just clean up the lines with a wire brush and then they pass fine...

I've used these guys twice now for repairs including spraying: http://www.harriscoachworksltd.co.uk/ The bloke who owns it is a great guy and they are competitively priced. EDIT: Don't provided a mobile service, missed that in your original message.

Common problem, people have plasti-dipped theirs however its not hard wearing. Best to sand down and spray or buy new.

Sounds like a wheel bearing to me, mine sounded different than others cars with bad bearings. Also got the sound on the motorway between around 60-65mbh. I also thought it was plastic vibrating. Bought a new one off eBay, fitted and the issue is gone.

Amazing film!

Can I shotgun these as long as they are mint. I have scratches on mine. Any damage?

You don't need to cut the tracks, that was done in an attempt to reduce noise.

Yup. I left everything as it was except soldering on the wires. Tape should insert and eject fine so does sound like something's not right.

I gave up. Get a tape, remove all the actual tape from it and put it in. No problem. I use a cheap Bluetooth adaptor and its great. Check out the last few pages on the Bose hack guide in the guide section.

Don't shout at me for saying this but can't you try the throttle reset (peddle dance) and see if its brings it back to normal? http://www.technosquareinc.com/350reset.htm

http://m.ebay.co.uk/sch/i.html?_nkw=+pin+brembo&_pgn=1 Think some of the seller's do them on here. If you need it quick might be worth a trip to the local motor factors. These brembos are not unique to the 350z.

Ahh interesting. I don't really like leaving things to body shops. Never used it before but might get some fiber and resin. What did you use to fill it in? Edit: thinking about it, the recess will take the 3m tape and as it's thicker it should make a good seal. Guess the best thing to do is buy it and then work out the best way to fit...

Was the bottom of the area that made contact with the boot a solid area? E.g like this:

Right looking into it if the entire bottom of the spoiler is making contact with the car then I should be able to use 3m automotive tape and silicone it to ensure an air tight fit. Does anyone know if the entire mating surface of the spoiler is touching the body work to ensure a good bond?

GT4's are terrible, really awful. I have a set of Rays I would be willing to swap for them

Right, once the Gia Cuzzo website is translated it says their is also made of FRP so I'm thinking of going for the ebay one. What's the best way to attach these as I don't really want to drill holes or ruin the paintwork if I need to remove it? I have seen talk of bodykit tape, anyone else used this stuff?

I would say dodgy carbon wrap...

Yeah stick me down 1.Randy Baton 2.Abbey M/S *??? 3.GARGOYLE??? 4.Hooch 5.

Porbably a bit late now but If you don't want to destroy the originals use these: http://www.caraudiodirect.co.uk/nissan-micra-almera-speaker-adapters

http://www.350z-uk.com/topic/86264-never-go-cheap/

Id be interested to know if this was any good from someone that owns one, looks pretty good from the specs: http://www.ebay.co.uk/itm/Double-2-DIN-Android-4-1-Car-GPS-Sat-Navi-Radio-Player-HD-Def-Stereo-Free-Camera-/171345733050?pt=UK_Audio_TV_Electronics_In_Car_Entertainment_GPS_In_Car_Audio_Players_PP&hash=item27e50065ba

Right, was looking for some spats as I'm coming into a bit of money in a month due to a bonus. (along with a lot of other things) I came across this on eBay from Tradelink: Liked the spoiler (even though it is wrapped really badly), do you guys know which one it is as I thought it was the Nismo V2 but that looks a lot bigger? If someone could link me up to one preferably in carbon or PU plastic (not fibre glass). Also a bit of a long shot but does anyone know of a gunmetal zed with these spats in carbon fibre and also carbon steps? (bonus would be a carbon splitter as that's the look I'm thinking of)