After the Bluetooth holder thing really started bugging me I decided to take it out, expecting to have to take out the centre console but iv just done it in 5mins!!!
If I would of known it was this easy I'd of done it ages ago. .
So just a little runt though for everyone :-)
This is what you have to start with. .
Pull the little cover back to show little screw, when you remove this screw you'll be about to move the unit around.
Then there is a blanking plate underneath the unit also pull this to remove it
Pull out the wires to show the connector blocks (mine were covered in foam)
Remove the foam and disconnect the unit. . .
I just tucked the other connector blocks back into the space underneath.
Then the good bit, get the floor plate and pull it up, mine was just held down with sticky pads but did need a half decent tug. . .
There will be another hole in the main floor of the compartment take blanking that you first removed fun under the holder and it will fit in this hole too. . .
You then have finished with a bigger and more useful compartment to use. .
This is what you should be left with
Please let me know if you found this little guide useful :-)
Thanks everyone