Puptread
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Puptread
-
-
I didn't use the 2001g
I used the basic black stuff that comes in a squeeze tube
Just read about the latter , sounds good !
-
Hi all
Had shift problems especially in the morning when cold
Just to say I've stuck new comma 75-90 oil in and a tube of molyslip ,and this morning , no shift problem at all , and generally all round better gear change.
-
Hi guy's
My 350 has a really low clutch bite
It's about an inch or so off the floor !
Is there anyway of bringing the bite higher?
I've read about adjusting the rod for lowering the bite but can't find any complaints or info on raising it
I assume its just the opposite but nothing written up , so thought someone may know : o
Cheers
-
Cheers guy's
Think i will go for one of the above mentioned and maybe steer clear of a janspeed system.
Anyway could do with a better sound as the OE is so quiet !
Any issues with it being the fairlady model ? Or are the parts pretty much similar ?
-
Just bought my first 350z
It's in need of a back box and centre pipe
I've seen lots of after market systems but can't find any OE exhausts online
Anyone now where I can acquire OE and/or if the aftermarket stuff is any good ?
Gearbox shift much improved
in 350Z General
Posted
I used the comma semi synth 75-90 just to see if it made any difference , it did : ) and wasn't silly money.
As for filling/ draining , you wouldn't be able to reach the drain plug through the gear stick area and not sure about top ip plug
I used front ramps and 4ft of garden hose to fill mine up
Also warmed the oil up in the microwave so the oil in the bottle flowed easier
Ended up an easy job.