Alessio

Yes, I did it. Removing the steering wheel i broke the flat who link to the steering angle sensor. As i read i'm not the only one who did it removing the steering wheel turned. Can someone please help me about it? To be more clear, is the white flat plug with about 5-6 pins. I need to get a new one and change it. (PICTURES ABOUT IT WOULD BE AWESOME) ThANKS

Hi, Can u explain me waht is, were is and how to set it to the rigjt angle? Thanks you : )

Hahahahahah sorry fo the title ; ) I just removed the oem steering and installed an aftermarket one. When i start up the car, everythings good. After some seconds tcs and esp lights cum up. Well, turn off the machine and the disappear, again i go and them come back again. I did the ecu reset, the problem still. Obd2 check, says everything is ok 2005 350z with radio and cruise control on the oem steering. Help

Hi, thanks for the help. If i well understand i have to use the red wire (12v+) and the pink as ground right? so it will works as the dome do? However i cant get why there are this kind of wire in te pillars.... maybe are the dome alimentation one? Thanks

Hello friends, i'm about to fit on my z the ghost logo projector, and of course want to make it works with the map lights. Well, i know i can get the +/- straight from the dome, but i don't want to make it pass trough the roof, then pillars then doors.... Maybe some of you know if i can get it near the fuse box? (not straight from the bcm pins), i was looking for the wires. Thanks you all guys, good day

Ahhahahahah.... thanks you all guys. I did. I took off the bcm.. i fried a contact. I welded a new one and now it works. Damm still cant get why it fried the contact and not the fuse. Thanks again ; ) Alessio

Hi. Can you link it plaese? English is not my 1st language and its hard to me to find stuff there Thanks

hello friends, I got a 2005 350z Lev.1 Times ago i was changing the interior dome lights from halo to led, Well, i made some short there. Changed the fuse, and i noticed that the dome lights now works only in manual way (by clicking) even if the switch is in "door" mode. Well, i read tooons of post about it. Lot of people fixed it in different ways, here's what i tried without success. 1 - Check all the fuse in all the fuse box. everything's good. 2 - Unplug the battery for 10 miuntes 3 - Unplug the bcm for 10 minutes 4 - Ecu manual reset procedure Some tips? Thanks, Alessio

Hello, i get it last summer, (was completely different when i get it) was completely stock, then i gone : V2 front, custom sideskirt, OZ canova "19, some custom painted details, sparco seats, led headlights and tail.. and go on.....

thanks, glad you like it

Nice to meet you all guys, This is my Z, hope you like it https://www.youtube....h?v=EuP4AQdk3uQ