RDON

followed blue 370z out of bawtry heading towards tickhill around 8am this morning. was in the blue GTR and gave you a flash as i turned off.

spotted nice 370z black reg starts with D2 pulled up just back from you at the lights before the Auckley roundabout in the blue GTR

Admin please lock as SOLD

don't have anything from you Olly

Hi All NEW OEM 370z Nismo RHD floor mat set. this was my spare set I kept on hand which never got used. grab yourself at least a £70 saving. £230 posted or £215 collected. based in Doncaster. SOLD As you can see they still have their protection film on the badges.

SOLD ADMIN please lock

SOLD ADMIN please lock

various red colour engine dress washers and bolts, ALL NEW - JOB LOT £40 for all. see list below 4 x M10 cup washers (good for struct brace) 11 x M6 x 19od CSK alloy washers & nylon protector washers. 2 x M8 x 30od CSK alloy washers & nylon protector washers. 6 x M8 ST/ST colourfast hex nyloc nuts (good for bonnet hinge area) 8 x M6 ST/ST colourfast 16mm long hex flange bolts. 5 x M6 ST/ST colourfast 20mm long hex flange bolts.

JOB LOT for parts from clearing the garage out. its been nearly 2 years since I sold the Nismo 370z but had these stored away. want the job lot gone so only looking for £150 for complete list. would prefer collection from Doncaster but may post if agreed. new 370z boot carpet. New never installed 370z traction control/VDC full disable mod unit. New red carbon overlay centre console trim pieces. used 370z Nismo gear surround with gear gator, switches etc- leather trim on gear centre worn but and easy repair. used 370z silver ignition switch trim. VGC used 370z speedo clock dash cover. VGC used engine oil cap. VGC used air intake pipes. swap out for silicon hoses when zed had 20k on the clock. VGC used number plate boot light units. VGC used interior light lens covers. VGC 5 x rays wheels centre caps used in VGC. used 370z passenger side later version darker door handle. VGC used 370z rear fog light in VGC. used boot lid weight. TIA

spotted grey 350z (py07) at the traffic lights Asda junction Harworth Monday 12th Feb, flashed you in the blue GTR

I have 1 Nismo, 4 370z and 5 plain left of the covers, please hurry if you want one as the US guys are desperate to get hold of them. thanks

only 1 Nismo engraved cover left so will only have plain and 370z engraved covers available after that folks.

I will PM those that haven't sent me a message that are on the list.

Good news! I will have the covers today. had to get a batch of 20 made so there will be some left over for others later on. PM me your requirements please. thanks all.

should have these manufactured by the end of October

are you wanting the 370z engraving or plain?

hi and sorry for the late response guys. seeing as we are at a group of 9, I will get an order placed for you all.

yes sir

if we can get 10 names i will get these made

I know! i was surprised too, but this is for a smaller batch than price break numbers, if we can get close to 20 it would be a tenner less.

Group buy for new rad covers: 1. 2. 3. 4.

sorry for the delayed response. yes I can give you some information. current costs would be £90 including postage for a cover. there is a minimum order quantity so i will start a list or a group buy for you to add your name, copy and paste each time and add you name etc. thanks

if the club admins are interested in owning this design 100% etc please contact me to discuss.

thank you all for reaching out in interest of the cover I designed etc. I would need a group buy of at least 20 as a minimum order to get these made if this helps folks. I don't want to bore you guys with a magna carta but from the experience of the last few times I had batches made and all that followed after this would be my choice now. I would be open to sell the IP (drawings, DXF files) so someone could get them made themselves and earn a little pocket money on the side for a reasonable offer, which would help the zed community out.

sorry all sold unfortunately... i did see a member selling his used one though I think. if there was enough interest for a group buy of say 20 I could get some new one made.