A9H-RX

Carbon interior trims? Gauge pillar pods for RHD zeds Nismo RS Bonnet?

10k, that be gone by new year I think

1. Wizard: Vortech v3 3:13 pulley, 'DE bone stock motor, 13psi, Uprev tune, 450bhp / 400lb/ft @hubs, Over 10K boosted miles so far. 2. Sam McGoo: Vortech V2 3:33 pulley,'54 DE stock engine,9.14psi,Uprev@Abbey, 402 HP/336lb/ft @Hubs 25k boosted on a 27k engine. 3. 4Re Leather: GTM S/C. Small pulley. 2009 HR Stock Engine. 10.35 Boost, 464.5bhp/383.3Ib/ft @ Hubs, 2k boosted on a 17k Engine 4. Oskaben: Vortech v2 Supercharger, no idea about anything else until mark at abbey takes it off the standard vortech fuelling and tunes it correctly! 5k boosted on 36k engine. 5. Darren-b: Vortech V3 standard pulley,'54 DE stock engine,???psi,Uprev@Abbey, 429 HP/???lb/ft @Hubs 7k boosted on a 68k engine. 6. Kev T: GTM supercharger, VQ37HR stock, 7.5psi, Uprev tune, 432@the hub and 367ft/lb torque with standard pulley 7. PlanetSurfer2: GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @ Hubs. Over 4k boosted miles so far. 8. Keyser: Vortech v2, 3:12 pulley, Fully forged 'DE motor with Tomei pro cams, Haltech Platinum pro, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @ Hubs. 4k boosted miles 9. andy james: GTM S/C, standard pulley, Stock 'HR motor, Uprev, 448.4bhp / 367 lb/ft @ hubs. 1k boosted on a 24k engine. 10. djtimo: APS TT Garrett Kit, Fully forged Abbey 'DE block, Uprev tune, 11 psi, 469bhp / 448 lb/ft @ hubs 11. jables: SFR TT, DE stock engine, 7.2psi, Uprev tune, 404bhp / 380lb/ft @ hubs, over 20k boosted on a 37k engine 12. OllyB: GTM S/C, standard pulley, Stock 'HR motor, 9 psi, Uprev, 471bhp / 371 lb/ft @ hubs. 13.D12BHP: Vortech V2 Si Trim 3.13 Pulley, Fully Built Engine.... @ 15psi... 14. GT4 Zed:Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft rev limited 6k rpm for now 15. Octet: Vortech V2 430rwhp and 360lb/ft torque 16. evilscorp: Vortech V3 Sci, 3.33 pulley, stock engine, Boosted 20 miles, 0.1 in anger428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar 17. A9H-RX: APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted 18. The chubby ninja- Vortech V3 SCi ,VQ35DE stock, 10psi, uprev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley Figures update

Seems short of 2 turbos IMO

I was thinking this. Not as if they will make her walk home.. But I'm not sure I could face the driver home if I was rejected at the gate

1 adult ticket = 1 adult + 3 under 16's. My missus wouldn't pass as an under 16 unfortunately So yes, I have one and need one more for her. I think it's stupid. They have limited tickets to fit cars on the tarmac, but tickets are 1 per adult anyway, so you can have 4 adults in one car which leaves 3 wasted tickets on 3 cars that can't attend..

Bump - Any done this on here at all? Still after a template if poss..

Tbh, I might just put the missus in the boot at this rate Ebay is a joke! People asking stupid money. and fair enough the £4 is for charity, but £10 resell including postage i Think is a reasonable offer for just the sake of passing it on. But I could rant all day about buyers and sellers I hate on ebay!

If anyone not going anymore and has ticket. Only need one more for the missus. Let me know asap, thanks

I'm going black splitter and got black side and rear diffusers

I'm probably going to invest in tarmacs flip plate so it gets sucked into the bumper

Too late to go back now, the grill has not been scrapped Now for the long winded mold and shape for perfect flush look

Very similar look to what I'm going for! Exposed intercooler, all flush bumper and bonnet cut outs

Very nice! Will be cutting my grill out tonight then Will probably get a logo sprayed on my intercooler, not sure yet.. Kind of like the exposed look.. Anyone suffer from major fin damage?

Currently carrying out extensive modification to my front bumper and humming and haring about cutting the grill out to show the intercooler off.. Anyone got any pictures of their grill cut out so I can see what it looks like and also comment to whether stone chip damage to the rad or intercooler if FI, has occurred more without it? Thanks

Remember seeing this for sale on pistonheads

Pm me if you don't sell them

Really like this! Where do you get it from? Cheers Black badges? You can get them on ebay. £49 I think for the set, bit pricey but worth it seeming as they don't do them anywhere else..

Website, number, address?

This is awesome!

Not good man Not long sold my old engine as well you could of had..

Awesome! All interior and exterior parts are gold mine over here but on his door step over there! Not fair..

Anybody got a cutting template for this? Searched pretty much whole of the net and no luck, just dead links.. https://www.google.c...eded%2F;750;500

12x3 is best size IMO. What I have on mine below

Outside! Sorry should of been more specific