Jump to content

WhackyWill

Members
  • Posts

    11,395
  • Joined

  • Last visited

Everything posted by WhackyWill

  1. Mine is peeling slightly, but not enough to start dismantling it and re-lacquering it, Seems a common fault .
  2. Dario is expected to make a full recovery, That's good news. Lucky chap :thumbs: . The driver, a three times winner of the Indianapolis 500, was removed from the car and taken to hospital where he has been examined and diagnosed as suffering from concussion, a fractured right ankle and a fractured vertebra. Franchitti will not require surgery, although he will be kept in hospital overnight.
  3. Apparently there were 23 people slightly injured in the crowd. http://www.youtube.com/watch?feature=player_embedded&v=TEuZPCiILC0
  4. Dario's nasty accident last evening in the Huston Indicar GP. Wish him a speedy recovery. (this one needs a scary face) http://www.youtube.com/watch?feature=player_detailpage&v=mJ3vw79o6n4
  5. Welcome to the Land of Zed... .. where abouts in London are you "Marmite" needs an MOT end of the month. .
  6. Why didn't Webber pull the onboard fire extinguisher is he that pi55ed off with Red Bull..? Definitely a touch of TC in the Red Bull, me thinks.. ;)
  7. If you can handle two Toms at the same time good luck mate... :scare:
  8. Im sure Chubbster it would have missed you, your ancestors would have looked after you, :scare:
  9. That was a few years ago. Now got "Free Nav" and "Waze" on my iPhone so £250 worth of Tom Tom is in the drawer waiting a visit to eBay
  10. I had a Garmin a few years ago, it was so crap I gave it to my worst enemy and bought a Tom Tom
  11. Very frightening accident from ALMS, don't need many as close as this. http://www.youtube.com/watch?feature=player_embedded&v=Rfvu29GMv8c
  12. Have a look at the post, I thought the problem was with the LED bulbs I had just fitted and they were causing a problem with the LED Tail Lights, as it turned out the LED bulbs from Autobulbs Direct were OK, the problem is on the circuit board inside the LED rear light unit from the USA which are only 6 weeks old, just coincidental that it happened at the same time I fitted the LED bulbs in the number plate and boot... Po Po happens. .
  13. Right' 2 hours later I have found the problem. Changed the LEDs back to standard bulbs, still got the same problem. Takeoff the rear LED lights fiddle about with the plug ..all work perfectly, put them back...AHHH ! same one not working again take them off change over the left for right (without fitting them)..all work but only one brake light on..! To cut a 2 hour story short I found a intermittent fault on the R/H LED rear light circuit board, stick you finger in the bulb hole and wiggle the circuit board about and you can bring on the fault..so had to now changed them back to the standard red lightswhich fortunately I still had so I can use the car.So apologies to Autobulbs it wasn't your LEDs but the expensive ones from the States. The problem is an intermittent fault on the circuit board inside the sealed unit (below)
  14. My son just finished a BA Hons which was 4 years in Sheffield I think that's South of the Border. ..!!! B)
  15. Thats a nice 350Z GT, with sensible mileage and only 2 owners.
  16. Wouldn't push it....warning points can materialize at any time..!! :scare:
  17. Right' 2 hours later I have found the problem. Changed the LEDs back to standard bulbs, still got the same problem. Takeoff the rear LED lights fiddle about with the plug ..all work perfectly, put them back...AHHH ! same one not working again take them off change over the left for right (without fitting them)..all work but only one brake light on..! To cut a 2 hour story short I found a intermittent fault on the R/H LED rear light circuit board, stick you finger in the bulb hole and wiggle the circuit board about and you can bring on the fault..so had to now changed them back to the standard red lightswhich fortunately I still had so I can use the car.So apologies to Autobulbs it wasn't your LEDs but the expensive ones from the States.
×
×
  • Create New...