Scott TMN

The ebay shop I assume? thanks mate

since the bodyshop split my headlights to paint, 1 has been causing me grief. So just wondering if any have any up for sale or know of any, if so just wondering how much I could be looking at for a pair? Cheers

thanks mate! good find!

Id be interested in that. Get the link up mate

Should also add non electric ones would be better cheers

Loosly on the scout for the above? To aid with fitting new seats in. Was wondering if anyone one has a pair spare, and how much im looking at for these? Cheers

Thanks a lot man! Im going to draw my attention to the interior now so I dont go ott with the exterior, as trouble is you always want more

Nope... :/ they said it wasnt their fault... (i think they were rushing may have had something to do with it personally...) and today I noticed a little scrap near the vents that someone has cause recently.... With regards to the price I cant remember exactly. I initially went to the bodyshop to get my blitz spoiler done, boot smoothed, canards and headlights done. They quoted and then I added the rear bumper on. They said to me £300 over the phone as its a fiberglass item, but they then added a bit more as they didn't realize the black bit needed doing when I called, plus I had my parking sensors fitted too. Total bill came to £1200

You know they are a must man and thanks, its not a mod id set out to do specifically, but whilst i was there kinda thing. Very pleased I did too Thanks man! Do love the chargespeed. It was that meet in southend that swayed me! Shame the bodyshop put a crack in it on installation though! I quite fancy getting the carbon insert bit eventually too!

There is already an option to tick so you do get a notification when your post is quoted

Cheers man!

Small update... painted my slam panel! This little mod came about through another little flaw presented by the bodyshop. My condensating headlight was getting progressively worse, to the point its water content got so bad it killed my bulb :o Thinking it would just need a bit more sealant.. off came the bumper.. Along with both headlights. This made me think this is the perfect time to refresh the otherwise impossible to clean, scratched slam panel. So then I pulled into the spay booth/front of the garage. All masked up, I think I had it covered.. Primer on now too. Glossed blacked up.. Masking off, quite pleased with the outcome And all back together! Ill leave with a few more pictures from the other night that my mate took that I didnt have when I uploaded the earlier ones.. Thats all for now

+1

Thanks a lot man! Sorrrrry aha but thanks for the kind words though mate Do love my exhaust, pretty sure someone else on here is running one too now. I do keep meaning to make a proper exhaust video from different angles etc.. And with the scraping.... na not atall.... haha to be fair there was a particular scenario which i should think contributed greatly to the above. It does scrape at times, but as a whole I would say the scraping is not much of an issue, and I think a lot of the times that it does scrape, was probably down to a poor entry angle. the Side steps have some movement so are pretty forgiving when they do touch. My exhaust does hang low in a certain place, but fortunatly its inline with the wheels so is hardly an issue too

Something like; "Psssssssssssssssssshhhhhhhhhhh!!!" It's great Scott, ...when you getting one then? Pretty much the only thing your Zed needs to finish it off nicely. Haha its I just didnt think they were as prominent on S/C setups for some reason is all. Funny you should say that, it was just last week I was saying to my mates how I was quite happy with the power. Though seeing this has not helped one bit! Really is awesome man! We shall have to see what happens next year..

Looks awesome mate! and certainly a dyno figure to be proud of! Love the gauges too! I have always wanted pillar gauges in my life! How does the BOV sound?

Really cool pictures and a very smart looking zed mate!

Really like your dash mate! good work. How much did you need to take out to do it? everything?

Thanks a lot man! Though I have Matt Bronze Loving the progress on your zed mate. Really good work! As others have said... keep it coming!

Personally I would take the opportunity to upgrade. Although welding would be a good temporary fix for the time being, assuming they dont want to charge too much for that. The MOT place does welding im assuming? did they say how much it would be just to repair it? If you are not wanting to spend out too much atm, and they are only going to charge £30 say then yeah get it welded (for now) if not an upgrade is due, and if you are doing that bear in mine the forums negatives thoughts on japspeed (though I have no experience with the brand myself) and go with a popular more recommended system like cobra? Least you know you will have no more bother and quality and fitment should be good too!

Wow, nice write up so far mate! and a mention too aha Really looking forward to seeing the rest of this!

Thanks guys and sorry Shezza

Last week I took inspiration from the '14 nismo 370z and put a red vinyl strip in the mouth of the bumper. Seeing how I like it, will get it painted the right colour down the line probably when I sort my bumper situation out Did do the same to the side steps too, though I took that back off..

Thanks man, I intend too You so should! Before the weather doesn't permit it lol

This video shows the difference between just the Gopro hero 3+ Silver vs the Hero 3 silver. 2 models that should be quite similar yet I think quite a bit of difference. Just bear in mind there will be an even greater difference between silver 3+ and the version in question.