lmc

No sorry

Your in a long que for this but if none of the larger items sale then i may have to rethink my plans.

Tbh there not going to work with a standard car it needs to be a wide arched car.

Not much interest in the aftermarket parts which surprises me. Any particular reason why?

More info on the air cup kit can be found here https://www.stanceparts.com/air-cup-lift-system/

Just for info as I've had a lot of messages I won't be breaking the smaller parts until some of the more expensive parts have sold.

Its just got to the point where I'm not willing to spend anymore money on it and unfortunately not being in a finished state the only way to recoup as much money as possible from it is to break it

Im using photo bucket to host my pictures and don't seem to be having a problem.

Seibon (02-08) carbon fibre vt style bonnet. £850 collection only trial fitted to the car only.

New lights £300 ordered from Australia as i was assured they were for rhd. been fitted to the car but not wired yet. will include a pair of 8 pin tails as there 6 pin plugs you will need to adapt them.

Takeda Induction kit been used for less than 200 miles on the car £250 Carbon engine cover £75 Carbon slam panel £75

Vertini drift wheels in good condition with a couple of tiny marks small amount of life left in the tyres but for purposes of sale assume they are dead Wheel Size 19 x 9 &10.5 Offset (front & rear) Front ET 20 & Rear ET 25 £800 collected

More parts listed. More to come

The time has come to accept the inevitable and break the 350z for parts. There are a lot of sought after parts which I will list below some of which are still in there packaging and have never been used. Any part which is listed below has done less than 2k miles as that’s all I’ve managed to accumulate in the 4.5 years I’ve owned the car. All parts are exclusive of postage although postage can be arranged for most things. Bank transfer preferable although PayPal is fine if costs are covered All other standard parts are available so just ask if you want something Will start with these wheels and add more parts when i get back from walking the dogs. Work T7R2P WHEELS Reluctant sale still in there box only opened to check there ok. Comes with centre caps and valves and a set of blue works open ended wheel nuts M12 x P1.25 Fronts are 19 x10 et 17 A Disk Rears are 19 x 11 et -42 A Disk Price is £2000 collected. Can post but at your cost and will be fully insured. photobucket.com New still in box Torqen under tray £150 Tarmac sportz frp roof spoiler £85 Tarmac Sportz g35 spats £85 Tarmac sportz frp side diffusers £140 Driftworks front camber arms £175.00 Stanceparts full (front & rear) air cup kit £ 850

Nothing to do with me but just spotted these. Might be of some interest to someone http://www.ebay.co.uk/itm/nissan-350z-aftermarket-headlights-brand-new-bargain-price-/132178552527?hash=item1ec674a6cf:g:z7UAAOSwjqVZCKC8

I'll take the 8pin headlight wiring looms assuming there headlight side and not car side. Alright to sort payment out later when I'm home from work?

Off will mean offset ie fronts et25 rears et 28 and the disk will be the type of face. Some manufacturers offer different types of disk

You could just put a spreader plate behind the rivnut

Ive been reading up on this myself and general consensus is wrap will stick fine to primer. I would still 800 wet and dry first to give you a smooth surface for the wrap.

Doesn't sound very healthy. Tims a wizard though so he'll sort you out

Air cups https://www.stanceparts.com/product/complete-kit-front-rear/

All in your opinion of course. Different strokes for different folks

Nice install got tthe same kit ( front and rear ) to go on my car at some point.

Hope this helps

Looking good. Looks like you need some spacers on the rear though