adevine

Again Thanks for the advice, Order is now placed, and if i see an increased tyre wear ill purchase some Camber arms. Cheers, Alex

Thanks for the info, I think its worth the risk, before i order them i dont suppose you know if i require to change the camber arm on the rears. i have read a couple of threads that state you need a kit when fitting the eibach springs. I know the weels will need an alignment adjustment but didnt think i needed to change any additional parts!!!

Thanks for the help, Im not sure about the offset, i think the width is 9.5" as opposed to the standard wheels which were 9.0" (i may be wrong). The Tyres on the front are 245/35 and the rears are 10.5" 275/30. Really wanted to avoid cutting the arch, Dont Suppose you know if Eibach do a spring for a smaller drop on the Front?? Thanks Again, Alex

Correct, I noticed it as soon as i began cleaning it, went back to STS and had them swapped over straight away. so all is well. You think i would have noticed when i picked it up after first fitment and allignment checks, i was obviously to excited.

Thanks, Had the car for a couple of years, only now started to mod, think im getting the bug.

This is my album, photos taken last week, ill get some more up when i use a decent camera.

Advice Please, I have just fitted my new vossens and im now looking at Lowering springs, I know the Eibachs will drop the front by 25mm and the rear by 20. I just wanted to know if anyone has fitted these springs on 20's and if so have you had any problems with rubbing on the arches?? Any advice is greatly appreciated. Thanks Alex

No Worries about the centre caps, i Managed to source one through revolution Autos, for free, so they are back in my good books. Your probably best sourcing them throught Prestige wheel centre in birmingham as they are the main Vossen distributor for the UK and will no doubt give you the best price. http://www.prestigewheelcentre.co.uk for the CVT's I paid £2800 with Tyres, Pirelli P-Zreo Neros.so your probaly talking around £1800 for the wheels. Expensive but well worth it.

This is just a few snaps before i lost the centre cap. I purchased the wheels from Revolution Autos in Gateshead, however they source them from Prestige wheel centre in Birmingham anyway so they all come from the same supplier. It looks as though its just the facia of the centre cap as the clip still seems to be attached. Ill get a photo and put it on later.

Help Please, Just recently fitted my New CVT's and on my first long run one of the centre caps has decided to take a jump on to the A1. Does anyone have any recommendations of where i can get some fairly cheap or if you have any available for sale. I want to try and avoid sourcing them through the company i purchased the wheels from as they were not the most helpful. Thanks, Alex

Thanks

Hello everyone, Just looking for a bit of help. I have been looking to get the Vossen CV2's Black with Machined Face for my 370z. I have tried a number of places but have been told that these are being discontinued and they are unable to source them. Does anyone know where i can get these or if anyone has any for sale?? Thanks Again Alex.

Mark, Im not sure of the code, im currently working in Norway at the moment, Ill get the code when im home in a week and ill contact you. Thanks for your help.