Jump to content

Keyser

Regional Event Organiser
  • Posts

    9,958
  • Joined

  • Last visited

Everything posted by Keyser

  1. You need the caliper bolts as well the bolts from the JDM brakes are a different thread and won't fit the brembo calipers at least that's what I found on the front, can't remember if you have to change the brake lines though I've nearly always fitted braided lines when I do that upgrade.
  2. Is it time for a sensible offer yet? GLWTS mate
  3. Only other thing I have seen that makes the problem intermittent is bushes they "pop" in and out of alignment and as they tend to wedge in or out of place can be hard to trace but definitely worth investigating. Buster may know which bushes needed changing as he was talking with somebody with that issue recently.
  4. Tyre size front to rear makes a difference as far as rolling radius and the TC is concerned. Possible wheel speed sensor fault, also steering angle sensor can cause ABS / TC issues so worth checking that as well. If the car feels "wooly" take the spacers off and drive it again if it's not planted then you need to check the bushes, track rod ends and alignment out. Can you post wheel / tyre sizes just so we know. Few things there to look at
  5. Plans for the Zed, Well Luke and I are still discussing that, the cost of the rebuild V breaking its a tough one due to the amount of damage and cost of parts to repair, we are both leaning towards breaking her but it has not been 100% decided just yet. I'll keep you all updated when we decide what to do.
  6. Yup can be replaced easily, ZmanAlex used to offer replacement nuts (17mm IIRC) with the belt kits - Clarke may do the same now Gotta get it off but a replacement should not be an issue
  7. OK Here ya go after our road trip we came back with this little beauty - Looks great don't it? But ....... yes there is always a BUT all is not well with this one Whilst she was out for a little run round a well known race track in Germany a rod let go and exited stage left straight through the block (it is still missing) The rod was followed by some hot oil that sprayed over the zorst manifold and a large fire ball ensued think it got quite hot More to follow
  8. Whatever Grundy has that keeps me at half a mile behind him so I can here the radio!!!!!!!!
  9. Well done for helping commander - hope both you and the cyclist are over it all very soon!
  10. Didn't think that would work but you did it If you look in the forums you will find areas to post split into categories so you can post in the appropriate one, for general questions just go for 350 general where this is posted. If you get it really wrong the mods will move it anyway
  11. Is it just an OEM bottom cover you need? I have one of those
  12. Paint it kawasaki green, job's a good 'un!! Now you are being silly Lime Green would be much better for a tank with CF Turret
  13. You know I would Alex but it's just a bit to far North for us soft southerners to venture
  14. O yes boys and girls stay tuned as the intrepid duo prep for an early start and another road trip,,,,,,, could this be the start of another epic adventure?????????????? Some previous road trips have resulted in .............. What will it be this time?????? Updates tomorrow Keyser and The Zed Shed Crew
  15. Ahh we have that in common my budget is £0.00 as well.
×
×
  • Create New...