Keyser

i am sure between us both we can sort it. Would you fancy posting a cheat sheet guide to this? Looks like a good mod. Are you trying to do the Handbrake - turns the light offf and disables the button or just how to install? @ Mrs Buster just

See Bob - We (meaning you) fixed it I still get the credit @ OP - Glad it's all sorted mate - told ya Buster was the ICE (wo)man

Coming along mate When you first turn the key on the fuel pump runs for a few seconds then cuts until the car starts - your 20psi Turn ign on you should here the pump turn off and on again about 3 times with about a 5 second delay each time should give you a bit more pressure to test before you fire her up. You will need her running to set the reg though Good luck

Be a while before we do anything to this one, Got to finish the Mini fit an SC with another member or 2 Also working on a little something else at the moment - hence the accomodation refurb. Yes I'm out there even in the cold - Come on Mr G waiting for you to get cracking How many times Bob! If I say "I will do something" it means WE will do it and I'll take the credit. If I say "We will do something" it means you and I'll still take the credit Unless something goes wrong then - YOU DID IT!!!!!!

along

Many Happy returns

Still waiting for the doughnuts!

When your Zed was imported one of the things that should have happened was the Kmph was converted to MPH, this means that the speedo and the digital speedo will both be displaying MPH. Thats why the k is blacked out - most JDM's are like this. You should have an import slip with the car this should state the Kiloneters at import and when the car was converted - everything after that change will be added as miles on the trip.

So you sleep well most nights then Nice work mate

Evening all, mammoth amount of work went on today, Huge thanks to Buster, who has become very fond of the nail gun Of course Mrs Keyser was sorting shelves and assisting all day as well Mrs Buster even put a few hours in (mainly burning things) So the base we finished last night Started with a base line Shelves starting to fill Old wheelbarrow used for a bonfire to burn the old wood Main workshop starting to clear Side wall and roof beams Load Tested Something else I had laying around from the old conservatory is this plastic roofing - lots of it So we made a roof Side wall Bonfire still going The back Then lined the inside Added a front and a door - yes I had that round the back of the shed as well The graffiti says "Z Annex Sand Blast Zone" All the parts back in - mostly a Mini in bits New compressor moved in Then a bit of cladding on the front to make it look nice Then we fed a mains cable through the loft down a 50mm duct and into ZeeAnnex Finally a well earned coffee break by the fire Very nearly there now thanks again to Buster for the help Get the wiring sorted and the main workshop done this week (hopefully) Have fun

This should be made a sticky as the definitive answer to grounding kits.

Do tell more - I used an adapter for the oil pick up on mine it "T's" in where the oil pressure sensor goes in - the return goes into my APS sump which has a pre tapped hole, what dose not come with the kit that we need? I can get adapters from a geat little place called Pipe and Thread about a 10 minute drive from here but they are not open at the weekend

Hope its a quick fix

PMSL

Can't we use your works van Darren?

along

The longer The hose the bigger the diameter you need 8mm minimum 10mm is better but gets pricey!

Nice parking mate. Should have painted them yellow mate.

Tell me what See you on the 23rd

Looking good, surprised you went for purple bling though.

Just for BBK as I promised Nail gun as modelled by Buster (I think he liked it) So me and Buster popped out on a road trip first thing (I got one Mr G ) Which meant a late start, however much was achieved I'm sure some of you are wondering how my wife lets me get away with all this - simples I let her play with the toys as well Partition wall going up Other side Buster supervises From the inside Shelving added Buster was very happy with the door While Mrs Keyser started sorting through all the Jars of nuts bolts nails etc I showed Buster the next job on the list. Behind ZeeAnnex we have "We have to clear all that" I said to Buster He got scared But we moved all the old copper pipe etc that came out when we refurb'd the house (I have pics of that as well if you like ) which I will run down the scrappy be a few quids worth there! Under that was this big pile of wood I kept when we pulled the flat roof off the extension I told you I horde stuff that may be useful so....... We moved that to one side Then we cut the timber up made a frame, by this time we were dodging heavy rain showers But managed to get the base finished as the light went That is the base for ZeeAnnex lean too and will hopefully get finished tomorrow. Massive shout out to Buster and of course Mrs Keyser for all the help today, still got plenty left to do tomorrow Now to chill out watch some TV and have some food. Have a pleasant evening all.

Nicely put I call my mates wife a Trolley Dolly and she hates it....... I call my mate Trolley Dolley he dosn't seem to mind

Good luck keep us updated don't forget -

Come on get them done sating black with an orange lip its the latest thing

Good luck with the hunt