Keyser

Some good work there you need a heater mate

is it a bit of zedshed magic then - didn't know somebody had invented antigravity yet lol no I meant the hook does not touch the front face it will touch the inside of the hole of course Not on there mate.

You simply coat the bit behind the hook first, as long as the hook does not touch the piece all is good It will be colourful underneath

Many Happy Returns Colin

Shurrup you!!!!! The ZedShed is booked solid at the moment!!!!!

Back at it today Firstly we did some Blue bits and setup an outdoor cooling rack so we could carry on powder coating without contamination. Then some black, yellow and silver The yellow pot at the back is an old smelting pot we found in the garden Mrs Keyser thought it would make a novel ashtray if it was yellow?!? Driveshaft's in silver - just because I wanted to see what it came out like Then when we striped the brake calipers this chap was smiling at us all striped Sandblasted and masked for PC A bit of fire engine red Stay tuned for the next exciting episode ...........................

Looks good

Hope you and the Zed are on the mend soon

3rd Pic the Blue and white wire is the wake up to the Bose amp so it may not be firing up - unless it's got a new feed its the other end of that wire that matters. Some one has cut n shut a HU in at some point - could easily be neatened up and rewired just needs some time and a bit of detective work on what is going where now Dunno if your near me, be happy to take a look for you.

Happy Easter As we had the day off Mrs Keyser, who loves sandblasting? went to work in the "Blast Chamber" I cleaned the dust of and got them ready for cooking as they came out We then cooked them all for a while at around 200 degrees - Two reasons for that. firstly it helps get the crap out of the metal so they don't out gas and spoil the powder coat and secondly its the easiest way I know to get the 20 year old dirty grease out of the suspension arms Had an old frying pan so put that under the parts in the oven to catch the grease in worked well Parts left to cool down again Then some nice loud orange powder coat applied and cured Stay tuned for the next exciting episode ....................

Nice work guys

Must be way over a million left mouse clicks EDIT: And there was another one

congrats

Have you moved back to earth then Ian?

+1 My thoughts, but that's why the frilly bit is there otherwise you get a messy bit on the left as you look in. As to the colour it does go and is not to blingy, my Mrs and Buster love it, I like it on his car, not green enough for me.

along We can help you spend all your hard earned £££££

Sorry folks been pulling a few late ones in the ZedShed, playing with powder coating and helping Buster out n the Ginger Ninja, However the Mini has not been left in the wings. A lot of the powder coat is on Mini parts and I've been finding things for Mrs Keyser to sandblast Before After Oppsss Think that may need to be replaced Playing with chrome powder coat Then a few bits to strip for PC I then stripped the front Hubs Bearings out Also All stripped Then - you know the hubs I stripped - Wrong ones They are the metro ones from the rally prep shell so .... Start again on the right ones, also did the rear arms This bush is a pain Cut with the airsaw Beat with hammer and chisel Remove the bits Then this come out and finally the bearing on the other side Stay tuned for the next exciting episode ......................

Just to be clear, you're calling Bob a tool? But I do have a planning app to rebuild the ZedShed with a higher roof so a ramp will fit

Evening all - I'm sure you are well aware of the RARE JDM Harness cover - well the ZedShed spurred on by Buster and Wasso's comments in the Ginger Ninja build thread would like to present for your delight (or disgust) the Ultra Rare ZedShed Harness Cover So started with this and a tape measure Found some metal Cut it shaped it and welded it Added a frilly bit sanded the welds A good clean First powder coat (not happy) Second coat and lacquer in daylight A few fitted shots Hope you like it all comments welcome The ZedShed Crew

He will be in his shed spraying things Spraying is So Yesterday - we powder coat now I'll See if I can make it along - some nice weather would be good though, the motivation fairy does not like the cold!!!

Add a supercharger and NOS

You won't be an alcoholic for long when the zeditis kicks in you'll have no money for beer

Sacrilege should have done the car Green as well!!!!!!!!!!!

Buster (AKA Bob) always have a Buster near by very handy

Lot of hours going in I got 11" wide on the back of mine Keep the updates coming.