Keyser

along

I would see this an hour late

Like the wheels Andy

@gg2040uk You weren't pretending you got stuck in and good on ya. BTW Guys don't upset her she undid the front caliper bolts like they were nothing - I've had to hang of those with a breaker bar in the past!!! Had a great day and we found out why your Zed didn't slow down so quick, it should now - I'm assuming they were JDM rear brake discs with Brembo calipers See you again soon at the Zed Shed I'm sure

Looking good mate Need a vid when you get them balanced up - should sound lovely when you get it all smoothed out

Should start without Aux belt (the small one) - Green plug could be the VVT (Valve timing) cable but not sure lots of cables and plugs - pic would be good. All lights and fan running constantly is sign of a bigger issue - something is not sending correct info to the ECU I'd have a good look for other damaged cables as a starter. Check under the plastic cover if you have one lot of wires under that to check. Good Luck

2011 Buddy

You know its a good project when you have to work out the best spot to put the "relaxing chair" before you start Keep up the good work

OK plagiarised directly from the instruction manual I'm sure @cs2000 won't mind Start up the car and you will see the button light up. Notice the usual lights go out on the dashboard as normal after a few seconds. Briefly press and release the button, a relay will click and the button led will turn off. You will now have the TCS and Slip lights illuminated on your dashboard meaning the Traction and Vehicle Dynamic Control stability aids are fully disabled. I got this. (I'm sure I did) If you now turn the car off, wait a second and then turn it back on again, you’ll notice the relay clicks again and automatically disables the stability features for you! Again as I recall BOTH lights came up on the dash showing TCS was still disabled. To re-enable them, simply press and release the button again and the button led will illuminate. Now turn the car off and on again and the TC and Slip lights will turn off on your dash. Traction and Vehicle Dynamic Control are now re-enabled just like normal. You MUST turn the car off and back on and the lights will go off after the normal delay time. I can double check this for you tomorrow as I will be with Beb who now owns my old 370z that I fitted the kit into, but I'm fairly sure that we expected and got identical results to the 350z when installed. Hope that helps but I WILL double check it for you tomorrow as it was a while ago I installed it.

Thats gone as well, got a few smaller parts, engine ancils and some interior plastics left now. All the suspension has now gone as well as the wheels.

That's gone sorry mate.

Yeah like I said just one SHORT story!!! Well only if you Really have to

I only told one war story - You youngsters dunno you are born!!! Had fun, Hope to see you all again soon. @coldel It may be old but distinguished and rugged is a better description

It's still here - no mountings - which are 4 long black self tappers thats all they come with AFAIK this one had one screw and 3 zip ties PM me if you want me to dig it out of storage

Nope don't know who that is???

Great to see some progress mate

I assume you mean the door glass seal? If so no, the rubbers on both sides were in very poor condition and therefore binned.

Heat - that's what I did anyway - I have oxy acetylene though not sure a blow torch would do it - heat it then run a chisel round the lip and it should give, failing that I have cut one off with an air powered cut off tool - think big dremel but it's hard to not mark the shaft. Good luck

Welcome along LS2 V8 With 350z engine Mounting brackets sitting in my garage - now that will drift Hope you get it sorted soon mate Plenty of pics of the build please

Sorry - That's gone already.

1. andy James- White Horse Full English 2. Humpy - White Horse full english 3. StormWhite -White Horse Full English 4. Beb - White Horse full English 5. coldel - Eggs Benedict 6. Gg2040uk (Maz) - American pancakes 7. Keyser -  - White Horse full English

Not yet but I haven't got any felt on it yet

Annnndddd in other, other news .................... Got the exhaust and turbo housing back from ceramic coating Got that all fitted on the rebuilt engine and we are off to Dyno on Thursday all being well, I'll let you know how that goes and try and get a video or two of the power runs Now onto something GREEN I bought this little latching relay from the bay 50p for scale Now this is for a GT-R mod I'm working on but I needed it housed in something, apparently Nissan heard about it and they said it was a brilliant idea and immediately dispatched a custom built GT-R upgrade box, and the relay fits like so Of course they had heard of my reputation so it came personalised O did I say Nissan sorry I meant @Beb who happened to have his 370z in the Zed Shed for some exhaust work and he also happens to have a 3D printer, so while I worked on the Zed he got busy designing on his laptop He is of course an expert in these matters and it came out perfect first time or maybe not No seriously huge thanks to Beb for offering to do it and producing the perfect box in the best colour What's it for ??? Stay Tuned Keyser Maximum Effort

Moving swiftly on ........................... Painted some more tractor parts for a mate of mine who ...................... well restores tractors Then as I was bored one weekend and someone gave me a tool box - I thought I'd get some practice in on my metal working (lack of) skills Metal sheet marked up Trimmed bit of folding bit of welding That now fits like so - Just need to sort the hinges and give it some paint or maybe powder coat Haven't decided yet. More in a mo ................................ Keyser Maximum Effort

OK OK I'm sorry guys n gals I haven't been updating my thread of much tinkering BUT I have managed to get out of the GT-R (mod for that in progress) and into the garage and now finally catch you up on a few things. So lets get started - The Zed Shed II has been crammed with cars, garden stuff and miscellaneous things for a while while we finished the work on the house big shout out to @andy james for another excellent job and at last we have had the drive done and it is now usable again But before they layed the Tarmac I gout out the Fisher Price My First Tool Box and had a go - That turned into - Just waiting for the felt roofer so it's waterproofed with damp course membrane at the moment But the finished drive looks awesome In other news and another reason I've been to busy to post, someone drove straight out of a side road in front of Mrs Keyser Yep another Nissan off to the big scrap yard in the sky So we have been playing the "lets fill in lots of paper work and make a lot of phone calls to the insurance company" game. Plus been out shopping for a new motor for Mrs Keyser, found one and deposit is paid just waiting for the insurance cheque now More in a mo ................... Keyser Maximum Effort