Adrian@TORQEN

Sure, I'll update you here hopefully later this evening.

My links are ace!

Hi Paul, Sorry, can't help on the DBAs, but we have the StopTechs in stock and on sale too!

Metal louvers now also available, 3 x 350z and 2 x 370z being manufactured this week, leaving USA next week hopefully! https://www.torqen.uk/nissan/350z/body-styling/exterior/18893-350z-zakustech-v2-hand-crafted-aluminium-louvers.html https://www.torqen.uk/nissan/370z/body-styling/exterior/18894-370z-zakustech-hand-crafted-aluminium-louvers.html Ready to take orders.

Hi Al, See the schematics below. Yellow arrows - NUT - 01223-00331 Purple arrows - BOLT? - I can't remember what's in there, how the brace is mounted, do you have any pics handy? Red arrows - BOLT - 11298-CD100 The CROSSBAR BRACE itself - 544B2-CD100 Hope this helps, but feel free to ask more questions here. Sorry for the delay in getting back to you.

Hi, If you're looking for new one, we have these in stock, ready to ship today: https://www.torqen.uk/nissan/350z/body-styling/exterior/1663-350z-torqen-undertrays-trq-ut350.html Currently on BLACK FRIDAY sale.

"In his article today, Mr Johnson says that he supports legislation backing a referendum – but warns that Britain’s problems will not be solved by simply leaving the EU as many of his Conservative colleagues apparently believe. “If we left the EU, we would end this sterile debate, and we would have to recognise that most of our problems are not caused by “Bwussels”, but by chronic British short-termism, inadequate management, sloth, low skills, a culture of easy gratification and underinvestment in both human and physical capital and infrastructure,” the London Mayor says." A column penned by Boris Johnson in 2013 that advised fellow ministers to stop blaming Brussels. https://www.telegraph.co.uk/news/politics/10052646/Quitting-the-EU-wont-solve-our-problems-says-Boris-Johnson.html

It doesn't look good from close up, trust me. They didn't even bother to spray the car, it's a very poor wrap...

300% they are SPL parts stamped NISMO. Confirmed by SPL guys at SEMA.

The will of the people... eh? https://www.newyorker.com/news/news-desk/new-evidence-emerges-of-steve-bannon-and-cambridge-analyticas-role-in-brexit https://www.opendemocracy.net/uk/brexitinc/peter-geoghegan/brexit-bankroller-arron-banks-cambridge-analytica-and-steve-bannon-expl

I'll fit a set on my zed before it gets up for sale in a week or two, I'll let you know how it goes

Ha ha, I don't know why I didn't think about you on the GReddy airex stuff, have a few in stock, should have mentioned these to you a while back Anyway, was going to say BRAUM RACING, but hey, if you don't want to check the website, your choice...

Upgrades: 1. Air 2 Air mod - better and safer design, removing the water cooling - piping from Supercharger to intercooler eliminating Stillen Y intake and small dual filter design, Bypass Valve Mount adapter, Treadstone Intercooler rated for 750HP, Intercooler mounting brackets, all cold side piping and intakes - 2.75" Custom Y pipe with MAF housings - Blow through design will allow computer to see temps unlike current design, Manifold Block off plate, all silicone couplers and T-bolts. I was going to powdercoat the piping in candy apple red, to match the rest of the engine bay, but you can do whatever colour you like :) 2. Brand new InjectorDynamics 1050cc injectors - 1050.48.14.R35.6 3. SC Upgraded 9lbs pulley 4. TiAL blow off valve 5. Custom Cold Air Intake 6. Brand new 8-Rib Supercharger Pulley (3.47") - Jackshaft pulley (supercharger side behind the 9lbs pulley) - 2A038-347 7. Brand new 8-Rib High-Traction Supercharger Pulley (3.00") - Final pulley for the rear side of the supercharger for 12 psi - 2A038-300 8. Brand new Motorcraft YS267 New Idler Pulley - Bigger idler pulley on the back of the supercharger, reduces slip 9. Brand new Stillen Supercharger engine cover - 407737EC 10. Brand new Stillen Supercharger mounting bracket - 407737-02 11. Brand new Stillen MAFs and TB Extensions harnesses - 407737-101 12. Brand new AEM 320lph High Flow In-Tank Fuel Pump - 50-1000 13. Brand new MAP 4bar sensor - MAP-GTR-4BR 14. Brand new SC Gates belt - K071045 15. Brand new Vortech SC oil - TRQ-VSCOIL 16. Brand new Vortech SC oil plug £6,750 shipped or collected Free shipping anywhere in UK, collection also possible.

Simon, check this video:

Wait until you see what else we're adding

Hi Martin, HR doesn't specify anywhere what Aluminium they use for spacers and what steel for nuts. TORQEN S spacers are made from 6061-T6 low pressure Aluminium die casting. The studs are 40Cr steel with a strength of 10.9 grade, SGS certified. Lug nuts are made from 35# Steel with a strength of 6-8 grade. We sold hundreds of spacers that went on 350z, 370z, GT-Rs, Mustangs and so on. Filters now added: https://www.torqen.uk/nissan/350z/intakes/filters/3730-350z-hr-hks-super-hybrid-filter-2-piece-set-70017-an004.html

BLACK FRIDAY Sale? Why only for a day or a few days? It's been a phenomenal year for TORQEN, so as a big THANK YOU to each and every one of you, customer or simple friend of TORQEN, we're extending the SALE for a whoooooopping 46 days! New products added several times a day, keep checking! Let us know if there is anything special you'd like added to the SALE. https://www.torqen.uk/blackfriday

Hi Ian, Sure, see below:

Now available to order online here: https://www.torqen.uk/nissan/370z/body-styling/exterior/18886-370z-nismo-genuine-2018-darker-grey-door-handles-set-806xx-xxxxx806xx-xxxxx.html

Replied, Sir.

Now in stock, pics below.

Hi Seb, Must be @4RE Leather's old car?

Welcome to the club, Chris! When you did the clutch, did you replace the CSC when you did the clutch? How about the Master Cylinder? Did you try to bleed it again? What are the symptoms?

Hi Colin, We have these in stock, Sir! See here: https://www.torqen.uk/nissan/350z/engine/gaskets/3709-350z-nissan-oem-positive-crankcase-ventilation-pcv-valve-11810-8j102.html

Ben, PM me your number if you're on WhatsApp so we can send you some Invidia Gemini sounds etc.