flyboy

AlienSurfer As I don't have a sweet tooth for doughnuts then hows about lunch in the local?

Depends on how many people in which areas, to make it worthwhile. I would certainly be able to fit one for you if you came up to the Midlands. Would need to be fine weather though as I don't have a garage (Its is now an office and utility room)

No not now i have realised you just take out the speaker To get to the solenoid wire

.

I have now finished sorting the wiring detail on the mirror fold module for the UK 350Z. There is now no need to remove the metal door panel or glass Access to the locking solenoid circuit now recomended from behind the speaker. For anyone interested they will cost £42.50 Plus postage and packaging. ( first class signed for) There have been some issues due to not being able to find a clean 12v signal to the solenoid which locks the door. There is a unique signal/wire for the unlock, but the wire which carries the 12v lock voltage also carries a 12v pulse on the unlock command. This has been confusing the issue and I have had to come up with a work around to the normal module, hence the delay and difficulty. I have the module working in the following format with the Mirror Switch in the off (Centre) position With the Ignition off when the doors are locked with either the key-fob or internal switch, the mirrors fold in. With the ignition on (or Acc Circuit on) the device is inhibited and locking the doors will not fold the mirrors. (This is to prevent the mirrors folding if the doors are locked when driving.) With the ignition off when doors are unlocked the mirrors stay folded. When the ignition is switched on (or Acc Circuit switched on) the mirrors unfold. Switching the ignition off then locking the doors folds the mirrors once again. The manual button for folding and unfolding the mirrors works as normal when the ignition is on or Acc circuit is on. This allows the mirrors to be folded while driving if needs be, to get through a tight gap etc. There is no need to glue a switch to the locking mechanism in the door, access to the locking solenoid circuit now recomended from behind the speaker. There is now no need to remove the metal door panel or glass The module is a sealed self contained "black box" with an external 15A fuse protection. There are 8 wires which need to be connected to the wiring loom within the door/doorcard. 4 of these are connected with Scotch block connectors, and 4 go one to each end of 2 existing wires which have to be cut. These are provided with bullet connectors. A full colour coded wiring diagram and fitting instructions will be provided with each kit. I will try to get a photo guide posted but to be honest if you cant do this from a wiring diagram with good written instructions then photos wont help much.

You cant edit my post only I can mate I will be starting a new list (asI posted above) as that one is a few months old.

Ok Folks, Sorry for the delays on this but I had been too busy at work to get any time for this, however I have had some time over the holidays and have now finalised the detail wiring of the mirror module. I have it fitted and working on my car and can now start a new interest list I will start a new post in member traders to explain exactly how it works (a bit different to previous module) and regenerate the interest list in that post.

Hi Lee. Looking for the plastic cover on the rear wiper arm ( that covers the spline and nut) as some ***** has arf-inched mine!

Count me in on this year +1 Camping. (Martinmac) You will finally get to meet me as well as the car !

Sad News, Thought I hadn't seen his car for a few weeks. RIP Keith, will miss bumping into you in a morning at the lights.

Hi Guys I have been away for Chrimbo in Marraketch hence no earlier reply from me on the subject. Cheers for the recomendation RT and Grlnet. As RT says it smooths out the airflow behind the air filter and gives a better smoother throttle response. ( See I knew the degree in fluid dynamics would count for something) However its not my design folks its pure Nissan and if they thought it worthwhile to spend money on it I thought it probably works and wanted one. I soon found out post 2006 airboxes were like rocking horse poo mixed with hens teeth. ( lots of info available on the forum and the net as to why, everyone with an earlier car was buying them up) I decided to copy it and make a conversion kit as I couldnt get a post 2006 airbox for less than £100. However making the tooling then getting it produced and zinc plated to match the original was going to cost a lot more........ The only option was to make lots and try to get my money back by selling them. Its still available for £37.50 posted as the full kit or £35.00 without the tube of automotive silicone if you have your own. There is a guide in the guides section for fitting http://www.350z-uk.c...-fitting-guide/ takes about 15-20 mins plus curing time. I can do a service exchange if you want and have a complete modified airbox ready for swapping over if you want to come and see me in Stafford. I may even be able to come to Wales or Lake Z for a days fitting if there is enough interest or advance orders.

I have a unit ready just cant find the time to re-fit it and write up a guide. If any one wants to be a test pilot then I can send out a unit with a basic wiring diagram. It would need fitting and a photo guide compiling by the tester. Please form an orderly queue!!! Pm me with your details and electrical experience if your interested.

Hi Rabster, Any details you have on the wiring diagram would be helpful to get this working more quickly. The kit works fine on other cars its just the body control module sending out the lock unlock signal which is causing me a few problems. Flyboy

I think this will turn into a winter test. I have some issues at the moment with the cars electrics/sound system and need to get these sorted before I can put this unit back onto test. Watch this space!!

Kits still available folks. Still at £37.50 posted out first class. PM me for full details

Thanks Nico. Glad you like it. Plenty more of these left folks. Just send me a PM

Yes but not at the Sale rate. Price is still £37.50 posted first class even though post rates went up. Normally sent out next day.

Not yet havent had the time recently to throw another half day at it to get the wiring guide done. Will try again this weekend.

Insurance claim will be valid as you have had an accident. Report it straight away!!!

Not ready yet as I have taken a fuse out. Needs a bit more trial time before it can be released. might be looking for a beta tester soon to help out with the trials.

Last few days of the sale

Yup behind door card.

Im in the midlands but its possible I could get a regional fitting service sorted out.

I have a New Auto Mirror Fold Module on test at the moment, but fine so far..... In the absence of Cookbot and his module and continued interest in this popular mod I thought I would release this if enough people were interested. It is similar to the previous module but there is no micro switch to fit as it works off the pulsed signal to lock/unlock the doors. It also has an added bonus of an auto protection mode where if the doors are locked/unlocked too many times in a short period of time then it goes into protection mode and the mirror motors stop folding/unfolding for a while. Therefore its an easier mod to install. It comes in a neat plastic box with a fuse protection and full wiring diagram/instructions. I will also post a picture guide to fitting in the guides section. Price will be around the £30-£35 mark depending on interest. I would be looking for around 10 people to get this going and could probably put a further 10 in stock myself. Please show your interest below. 1. Steve W 2. Squit 3. Paddy 78 4. drysd4le 5. B3n5253 6. onthatBOMBSHELL 7. 313GT 8. Wackosr 9. Darren-Z 10. This could is offered as a DIY product but could be fitted on request for a fee. Thanks for looking Flyboy

Wish mine was speedy delivery, still waiting for it Hi Bry you have a PM Posted out a second one yesterday. Usually reliable post gone wrong for the first time on here. If they haven't arrived within 4-5 days of you paying let me know folks.!! Brian left it 2 weeks before he asked for a an update on delivery!!