Jump to content

evilscorp

Members
  • Posts

    3,376
  • Joined

  • Last visited

Everything posted by evilscorp

  1. Unfortunately my computer is missing a monitor due to moving house so can't check the other photos I took and my memory sucks, but I do know I had a hole in my elbow, just can't remember if I got sent a new one from aam. I will check my photobucket tomorrow.
  2. http://www.350z-uk.com/topic/64159-scream-if-you-want-to-go-faster/ So it connects at the bottom of the pump but as chubby said file the bottom of the pump carrier to get a good seal or YOU WILL GET A LEAK! =)
  3. For the weight of your car compared with ours, standard would be fine, but as Sam I run the setup above.
  4. The 90° bend goes in tank I believe, can't quite remember but thought mine was broke too due to the randowm wee hole.
  5. The list is nearly endless if you want to do a build "right" just have to deside which parts you need to get a set power goal. I think UK owners tend to buy more parts than they actually need for their goals compared with the, yanks who just scrape the bare minimum together and end up with the same power (not as reliable probably), honestly not sure why I started this as I'm a bit drunk.
  6. It can cope, just higher hp 400whp+ I think it struggles unless you have the larger diameter intake pipe.
  7. No vin on my windscreen either, just a jdm thang! Z33####
  8. If your car is a 2003 it is outside the bellhousing for greaseing the (slave cylinder? Can't remember it's name) quite easy to do yourself from underneath. As for the other jobs it sounds like you are being defeatist or have already made your mind up.
  9. 1. RJF - Pre Facelift - Nismo 2. bc1987 - Pre Facelift - King 3. Hell presidente - Pre Facelift - Nismo 4. evilscorp - Pre Facelift - GT 5. grahamc - Pre Facelift - Nismo 6. cs2000 - go on, go on, go on, you know you want to!
  10. Any other ones for the early bumpers? Not sure I am sold on these and the yellow Kevlar puts me off.
  11. King and gt look very similar, any more pics so I can make my mind up Tarmac?
  12. Don't worry UK customs takes a few weeks to send you the bill =/ but the bushes look a good deal even so.
  13. Tarmac are you taking on this challenge? If you can do it for £99 I am in.
  14. Or just ask chubby ninja I on the other hand might need a longer belt
  15. bummer, feel your pain mate, but remember be calm as they are you neighbours and cars are easier to fix than constantly looking over your shoulder or letter box for dog turds.
  16. ordering from america and shipped to my aunts house over there.
  17. Been a few post about it previously but don't think I've heard of a failure but can't say I know of anyone that didn't do some reinforcement of the top mounts. Just quite a big change of where the weight of the car now sits and she is a heavy bugg'er.
  18. Unfortunately he is the other side of the country from Toronto so won't be able to see all his big boy 4x4 toys.
  19. 1. Vlad - 3.12" pulley x 1 2. ChrisB - 3.12" pulley x 1 same as Vlad 3. Jumping350 3.12" pulley x 1 4. Evilscorp - 3.12" pulley x1
  20. Rtv blue is what comes with the stillen sump pan, not sure what kind Nissan use but it's not an actual gasket.
×
×
  • Create New...