ric

Cheers guys! How would I go about removing this? Do I have to start taking things apart? It didn't seem to just "unbolt" Thanks,

Hi guys, This will probably be a stupid question ( ) but... Whats this?: Come to trial fit my new wheels, and this little bolt obstructs the wheels from sitting flat (The "Bolt" (or whatever it is) is as long as the wheel bolt studs). The wheel does have indents in the back to allow for things like spacers, however they don't go close enough to the centre of the wheel to allow this bolt to sit in properly. To say its annoying is an understatement I'm going to space the front wheels out anyway, but I'm going to have to buy a spacer big enough to clear this aswell by the looks of things. Cheers in advance!

Heyup mate, PM on its way Thanks,

All PM's replied to.

Up we go!

Hey guys. Thought you might appreciate this. Free card up to the value of £2.99 from http://www.funkypigeon.com/ You just need to pick your card and use code FUNKYFREE at Checkout.

Hey guys, Have a set of 19" wheels for sale. I purchased these 2 weeks ago, but have since purchased some brand new 20" wheels, so these are no longer needed. The wheels themselves do need a bit of TLC, but a refurb would bring them up perfectly. One of the wheels does need a little repair work though, it has some (very) small splits at the back of the wheel. The person who had these before ran them fine, so you probably wont notice, but wanted to be honest about it (Which the person I purchased these off wasn't ). I've reflected this in the price though. I trial fitted them and all fitted fine over the brembos. They don't have the ET stamped on them, but I would guess around et20. Rears are wider and look prity evil with the concave face. Not sure on widths but I would guess 9" front 10" back. Tyres are 245/35 on the back and 235/35 on the front. Plenty of tread, rears are at 5mm, fronts at 7mm, although 1 or 2 of the wheels have had the tyres removed and put back on, so will need inflating! Centre caps are included also. Bargain price of £400. I'd rather not post these if I can help it, just because its a pain to get them all packaged up, so would prefer collection. Based in Stoke on Trent, but am often around the NW so could meet if its convenient. Thanks,

Up we go! Anyone have anything else? Still hunting

Where would the blitz sit ??

Bump! Will consider swaps for 350 parts (Front splitters, rear splitters, side skirts, anything carbon, exhaust parts etc etc) What do you have?

Bump! Will consider swaps for 350 parts (Front splitters, rear splitters, side skirts, anything carbon, exhaust parts etc etc) What do you have?

Did anyone get any prices off ABP etc yet? Cheers!

All sold, Could you lock this up please? Thanks!

How does £65 including delivery sound? Cheers,

Any room to squeeze another on there?? Cheers

Hi guys, Has these previously for a project I was going to begin on my old car. (I was going to replace my wing mirrors with cameras and display on the steering wheel on mini screens!). All are in car designed. The screens are about 2.5" - 3" wide and high. The cameras are decent quality cameras. I have 2 screens and 3 cameras. Please note though, non of them come with power cables to power them. They appear to just be the 30p maplin connectors that you need (They just need 12v). This is reflected in the price. Looking for £15 each + delivery (On all of the above). Thanks,

Cheers for the pics guys, just what I was after! Yeh, holes in the bumper aren't too much of an issue, plate will be going back on there. Cheers!

Cheers, will keep having a look! Can you remove it from the front of the car? Or do you need to access the back of the bumper? Cheers,

Hey guys, Did search the forum, but can't find anything on the above! I'm thinking of removing the standard number plate holder/surround on the front bumper, and sticking the numberplate directly to the front bumper instead. Has anyone done this before? Many holes left behind? Would be interested to see pics! I'm hoping to make the bumper seem much smoother! Cheers,

Hi guys, Purchased this with a view to install in the 350z as part of an in car PC. I ended up purchasing a double din head unit instead, and although I would prefer an in car PC, I don't have the time to get this even off the ground! Need to clear out a load of items that are clogging up the shelves in my garage! The monitor has never been used, although I did begin to tape up the cables to route them in the car (Although never got around to this!). Disc is included to configure the touch screen, and the screen is currently still assembled exactly how it was when I bought it (I had planned to take the casing off and install in the centre console). Comes with everything as I purchased. Looking for £110 + Postage. Thanks,

Hi guys, Having bought this a good while ago for £360, I have literally used it a handful of times. It was one of those impulse buys, that I never ended up using (Another one!! ) Cracking little net book though, weighs next to nothing, uses an SSD Hard Drive, which basically means there are no moving parts inside, and also means its ridiculously quick. Its also tiny, and very easy to carry around etc. Windows XP installed etc, very easy to use! Comes with all original packaging, including original box. Because I've hardly used it its in gorgeous conditions, and with it being the pearl white one, it looks gorgeous too! Built in Webcam, and I have just powered it up to install all the latest XP updates. It comes with the original disc, so you can restore it if you want to, but i've cleared the PC of all but the basic stuff anyway. Full spec here: http://uk.asus.com/Eee/Eee_PC/Eee_PC_900/ Looking for £150 + Delivery (Or collection if you are near!) Cheers,

Cool, cheers guys! I think I'm prity much set on the Scorpion exhaust, although having trouble trying to source a Y-Pipe!! I'll keep looking!

Hi guys, Looking to get a new exhaust soon with a new Y-Pipe. I'm going to get the Japspeed Y-Pipe and wondered if both exhaust systems (Scorpion or Japspeed) fit the Y-Pipe? Also, do both the Scorpion and Japspeed exhausts have little fitment issues? I've read the Japspeed issues before, do the scorpions not suffer from this? Thanks in advance!

Hey, Sorry, I'll explain myself better. If I need to get a new tyre for one of these wheels, could I just do what I normally do and order a tyre off the internet, and get the local tyre shop to fit? Thanks, You cant get these tires changed at a local garage. You need someone with a specialist tire changer thingy. I found that out the hard way and had to have all the wheels refurbed! Cheers for the info mate! Perhaps people will think before they jump on sensible questions in future

Cheers for the clarification. I just remembered reading that GTR owners were having nightmares with tyre replacement costs / problems with fitments / problems with only approved garages being able to fit them. I wonder what they were moaning about if its as simple as above