M13KYF

If anyone saw the brilliant doco on the underhand dealings Donald Trump and his golf resort in Scotland. You can sign a petition here http://you.38degrees...he-trump-resort to have a proper public inquiry http://www.bbc.co.uk...etland-21445993 http://www.youvebeen.../THE_MOVIE.html

CS down in leicester is a independant, recommended. He is a trader on here also

http://www.350z-uk.com/topic/6183-dealership-praises-and-woes-now-inc-independants/

yep seen it. Also a very large asteroid called 2012 DA14 the size of an olympic swimming pool going between us and the moon tonight at around half seven. You will need binoculars Animated visibility map for asteroid 2012 DA14 between 18:00 and 21:30 GMT. The asteroid will be visible from green areas.

defo RS4

worth just putting in new batteries in ya keyfob. You can get them dead cheap of flebay

I'm on my way, wait for me. in stock and ready to go!

try your spare key and see if you still get the issue.

interesting

looking good

Eibach ones from CS is what you should get. You at least know your buying a quality product thats had loads of R&D doen it and more to the point is balanced. I would have no idea if the cheap ebay ones are

to the club

couple of bottles should be enough

what brand are they? are they silvertec

8k mine and passed MOT last week

careful with them. police are hot on ya heels if they dont indicate orange enough, We found that out on a wales drive. The silvertec one can be dim and pale

standard in UK cars not imports

another method posted ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement INFOID:0000000004460995 INITIALIZATION PROCEDURE 1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or more. 2. Door switch is OFF (close). 3. Turn ignition switch ON. 4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open.) 5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position, keep pulling the switch for 3 seconds or more. 6. Initializing procedure is completed.