M13KYF

Sennheiser IE 6 for £50 atm on Amazon. £20 cheaper than anywhere else and some places they are over £100 http://www.amazon.co.uk/gp/product/B00125UBUG

not quite a mountain bike but its pretty cool http://www.youtube.com/watch?v=JYELRfVxoBg

just try the search button, simples viewtopic.php?f=35&t=4021&hilit=spark

ere ya go viewtopic.php?f=35&t=21318&hilit=speaker

there is a guide in the guide section on how to fix it

spoiler depot is the place your after

deepest condolences

the earforce dss is also a great addition by turtle beach. http://www.amazon.co.uk/Turtle-Beach-Su ... 889&sr=1-8

nice looking Z, I hope it all works out Think a member had already spotted it for sale

not much use though if during the mugging they take your phone

nissan upgraded the droplinks to prevent future failure, ZMANALEX or Horsham do them. Takes a hour to fit. Worth doing the rear anti roll bar bushes while your in there to for the sake of £24 for some poly ones

could be one of the heat shields is loose, couple of members have reported issues

thats what I do each year

http://www.precisiontrimming.co.uk/ used by a few members here, based in Homlfirth, last of summer wine country just try the search button

here ya go, a pair sadly but not a bad price http://www.ebay.co.uk/itm/02-05-Nissan- ... 20befd36c6

Only three companies I know of who can do it, Abbey, RS Tuning and Horsham who can do the 350z

Please read all instructions and be familiar with them before any attempts. A stop watch or an analog clock with a second?s needle will be useful. ECU Resetting Procedures Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON. A stop watch or an analog clock with a second?s needle will be useful. Operations Procedures 1. Confirm that accelerator pedal is fully released, turn ignition switch ?ON? and wait 3 seconds. 2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds. 2a. Fully depress the accelerator pedal (HARD). 2b. Fully release the accelerator pedal. 3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. 4. Fully release the accelerator pedal (while the CEL is still blinking) 5. Wait about 10 second. 6. Fully depress the accelerator pedal and keep it for more than 10 seconds. 7. Fully release the accelerator pedal (The CEL light will continue to blink). 8. Turn ignition switch to ?OFF? position and now you can start the car. The CEL light should be gone. If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU.

yeah for the big man

not sure the wing is right IMO

feck!

Have you tried Mr.F at MJP. He is a trader on here. Think he used to do them