M13KYF

Sold - thread locked

cam shaft sensor would be the next thing I would look at

posted it on your behalf

sorted out images to display. A bit small though

post your competition on our facebook page https://www.facebook.com/groups/4863263215/

Could be a couple of things Battery MAF sensor Cam Shaft sensor

done

simples, take them out of the frame

you can get both belts from ZMANALEX. You can DIY if competent enough. If not it shouldn't take more than an Hour at a garage

one more of topic from anyone and its a warning

right please back on topic now I have cleared the mess up. Anymore and it will be locked

thread tidied

Am i right in saying that with the indoor cover you cannot use outside, so youd have to get an indoor snug fitted cover, with the outdoor cover then placed over it? RaINE just buy an outdoor one. I just needed one for the garage. You dont need both The thing you do have to remember with covers is that its not best to use them when the car is dirty. You will be rubbing the dirty against the paintwork when fitting. I use mine to just to keep the dust off. Its not a daily driver so spends plenty of time tucked away.

to the forum

thread tidied. Seller breaking forum rules. No username in picture.

:cloud9: :cloud9:

Sold - thread locked

Sold - thread locked

I have the inside one by these guys. Made to measure and excellent value http://www.cover-zone.com/

have you checked the connector behind the control unit is properly connected. May have come a bit loose

what condition are the wheels in happy for you yo post the other close up pictures you have without username on