Jump to content

M13KYF

Ex Team Member
  • Posts

    27,715
  • Joined

  • Last visited

Everything posted by M13KYF

  1. M13KYF

    Toyota FT-86

    think i need to see this in the real, I'm not convinced yet, looks like a Hyundai rip off off the 370z and Rx8 mixed together
  2. i think they must be updated there site and they havent configured it properly. A couple of weeks ago it did look as per Grantmitchell's link but now I see the one I posted
  3. http://www.youtube.com/watch?v=tEdPJaq6t9s&feature=related
  4. link is working for me http://www.ledlenser.com/category/flashlights
  5. aircon on or off Air con off. It's like every 5 or so seconds it's missfiring or about to stall and it goes down then up. certainty not normal. See if it helps with the aircon on. You may have a earthing issue or air filter is clogged up or MAF sensor
  6. I needed a new torch after not replacing the maglite which was stolen a few years back. I bought a LED Lenser P7 after doing some reading. I have to say what a beautifully made and engineered torch which is super bright (blinding if you look into the lense when on). If you like cool weel made stuff, you will like this http://www.ledlenser.com/product/p7 so good its used by the police and army
  7. this chap has perfected this art
  8. go to my cars, there you can paint and add decals, take photos I was more interested in the 400 bhp TBH. buy parts
  9. Having followed this thread I now have 3 different types on order/arrived! I suppose the best thing to do is test the resistance on the originals and fit the ones that match the closest (resistance) unproven if it does or doesnt, I'm just saying is it the best policy
  10. might be worth getting a separate thermometer as oven ones can be inaccurate
  11. Lockwood and Greenwood have serviced my car every year. Very good
  12. I would be careful with those led bulbs, its unclear from the picture or listing that they have a resistor built into them which. I have seen on some ebay adds the following where the LEDs dont have a built in resistor DUE TO THE REDUCED RESISTANCE IN LED BULBS CERTAIN CARS MAY REQUIRE A RESISTOR TO BE INSTALLED WHICH WILL THEN ALLOW THE BULBS TO SIMULATE THE SAME RESISTANCE AS YOUR STANDARD FILAMENT BULBS. A SMALL ADDITIONAL PRICE TO PAY TO ACHIEVE THE LOOK THAT THESE BULBS WILL PRODUCE! here you can see ones for the Zed with the resistor built in. http://www.autobulbsdirect.co.uk/501-le ... rch=c14858 i would be more concerned if the sidelights without the resistors have an adverse effect on the bcm or ecu.
  13. go to my cars, there you can paint and add decals, take photos
  14. I would be careful with those led bulbs, its unclear from the picture or listing that they have a resistor built into them which. I have seen on some ebay adds the following where the LEDs dont have a built in resistor DUE TO THE REDUCED RESISTANCE IN LED BULBS CERTAIN CARS MAY REQUIRE A RESISTOR TO BE INSTALLED WHICH WILL THEN ALLOW THE BULBS TO SIMULATE THE SAME RESISTANCE AS YOUR STANDARD FILAMENT BULBS. A SMALL ADDITIONAL PRICE TO PAY TO ACHIEVE THE LOOK THAT THESE BULBS WILL PRODUCE! here you can see ones for the Zed with the resistor built in. http://www.autobulbsdirect.co.uk/501-le ... rch=c14858
  15. or the 2nd hand supercharger kit from abbey via ebay
  16. still does work at the BBC., but he's not a cameraman there, but yes you can see he has a good eye for this stuff
  17. I know stephen brooks from the beeb, worked with him on Question of Sport. His vids are very good
  18. Had a play with the 370z theme to see if I could work it out. Made it better I think - it displays down to slightly less resolution - but it still dissapears if the screen gets small enough, but eventually it doesnt go any smaller and forces you to scroll sideways. Cant work out what would make it stop disapearing noticed this problem for a while. I think it is linked size of window. If on the computer you make the window size smaller the messages tab disappears
×
×
  • Create New...